-
Out of stock
Included in this listing is a functional set of parts for the latest release of the Voron 2.4. Includes all functional parts and your choice of toolhead and control board bracket parts. All parts printed in ABS and/or ASA. Please see: -below for a full list of the parts included -photos for the color combination (All Black) Please advise of the hotend and control boards that you will be using for the relevant parts to be included in your parts kit: -
M5 Flat Washer Zinc Plated Quantity: 200 pieces -
Out of stock
BigTreeTech Smart Filament Sensor 2.0 features:- Detects:
- Nozzle clogs
- Filament runout
- Filament tangles
- Extruder issues
- Status light indicator
- Compatible with 1.75mm filament
- Firmware: marlin2.0.x / klipper / reprap firmware
- Detects:
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
Light weight carbon fiber X gantry replacement for Voron 2 & Trident.- Much lighter than aluminium extrusion
- Suits MGN12
- Rigid 2mm wall design
- includes mounting/installation hardware
-
Voron Tap PCB - Optotap.- Version 2.4
- 24v or 5v operation
- configurable led lights
- overcurrent protection
- reverse polarity protection
-
UniqueABS filament is a high quality, high performance ABS made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- Suitable for use in and outdoors
-
Out of stock
Engineer SS-10 features:- Ideal for insertion or extraction of housing / cable connectors on PC boards
- Helpful to extract Quad Op.-Amp (Operational Amplifier), too
- Holds the connectors with the accurately-machined tips and pick them uprightly without damaging cables on the circuit board.
- Made in Japan
-
Out of stock
Omron DWHL-C203MR General purpose switch- Alternative sensing option for Voron TAP
- Pin plunge actuator
- Rated Voltage: 5 VDC 1mA to 12 VDC 2A
- Operating Temperature: Upto 85c
-
Engineer NS-04 features:- Compact body fitting well in the palm, ideal cutters for precise PCB work
- Heat-treated for excellent cutting capacity and durability
- Flush cut recommended for cutting copper and soft IC leads
- Soft-touch handles and coiled spring ensure repeated and comfortable work.
-
Sale!Out of stock
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. -
Out of stock
Btt Pi TFT 50- Compatible with Raspberry Pi - Connects to Raspberry Pi via DSI interface
- Special hole design - It makes installation of Raspberry Pi more robust
- Adjustable brightness - Easy and convenient
- Responsive touch control
- Size: 121mm*76mm
- Display area: 108*61.8mm
- Number of screen backlights: 18-LED
-
Out of stock
The Octopus Pro features:- Main Control Chip
- Support 60V Input
- 6 Controllable Fans
- Update Firmware: Klipper/Marlin/RRF
- Level conversion IC
-
- More eye-catching industrial design, with practicality and aesthetics
- Larger heatsink for better heat dissipation
- Equipped with the latest G0 series MCU
- Change the USB mini interface to USB Micro B
- Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional
-
Out of stock
48mm high power stepper motor by LDO Motors.- Model: 42STH48-2504MAC(F)
- 0.9° step
- 2.5A rated current
- Weight: 350g
-
Voron Trident bearings pack contents:Item Required: Included: F695-2RS 20 22 -
Out of stock
UniqueABS filament is a high quality, high performance ABS made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- Suitable for use in and outdoors
-
Out of stock
Titanium gantry backers suitable for both Voron 2 and Voron Trident 3D printers.- Laser cut
- 3mm thickness
- 2x Y axis
- 1x X axis
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
The Voron Dragon features:- Compact form factor
- Exceptional thermal isolation
- Multipoint mounting structure (non structural heatbreak assembly)
- Capable of high temps for advanced 3D printing materials
-
Out of stock
Smooth PEI film coated spring steel flex plate. Please see below for more information. Select your desired size: -
Out of stock
Smooth PEI film coated spring steel flex plate. Please see below for more information. Select your desired size:
-
- 18 AWG FEP Wire
- 30M Total wire length
- 10m Green
- 10m Blue
- 10m Brown
-
Extruder pancake stepper motor by LDO Motors developed specifically for the Sherpa line of extruders with an 8 tooth gear for increased extruder torque.- Model: 36STH17-0354AH(G8T)
- 1.8° step
- 180c insulation class
- 8 tooth motor gear
- Weight: 70g
-
- Inner diameter: 5mm
- Outer diameter: 13mm
- Width: 4mm
- Flange Thickness: 1mm
- Seal type: rubber seal
- Quantity: 10 pieces
-
Voron universal buildplate suitable for both Voron 2 and Trident 3D printers.- 300x300 mm
- 8mm thick
- cnc machined
- chamfer finish on all sides and edges
-
Synchronous belt pulley suitable for Gates POWERGRIP® 2gt belts up to 10mm wide.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black Oxide finish
- 6061 Aluminium
- SKU: RLA20-2GT-10-P5-C-H20
-
Sale!
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. -
High temp cable ties feature:- Dimensions: 150mm x 3.1mm
- Multi-purpose cable tie for many applications, including demanding, high temperature environments
- Material: High temp Nylon + PA66
- Operating Temperature: -15°C up to +180°C
-
High quality magnetic sheet to be paired with removable flex plate systems in 3D printers. Perfect for sustained high temperature 3D printing. Made in Germany by Schallenkammer. See below for further information and technical specifications. -
Nickel plated copper hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
T8x4 leadscrew nuts in manufactured from POM (Delrin) material.- lower noise
- self lubricating
- long lasting
-
Voron 0 linear rails - complete set of high quality stainless steel linear rails and carriages. Purchase includes:- 5x MGN7H rails
-
Ball spring t-nut pack for the Voron 2.4 3D printer. Compatible with both Misumi and LDO 2020 aluminium extrusions. -
This printer bed connector kit allows you to quickly and easily connect and disconnect your printers heated bed assembly. Includes all connectors and pins required. Please see below for further information. -
Out of stock
UniqueABS filament is a high quality, high performance ABS made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- Suitable for use in and outdoors
-
Out of stock
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
Black PEI powdercoated spring steel flex plate. Please see below for more information. Select your desired size: -
Sale!Out of stock
Micro-switch based probing assembly for 3D printers, lasers and CNC machines.- Highly accurate and consistent omron D2F-5 microswitch
- Magnetically coupled with screw fastened countersunk magnets
- Upto 80c operating temperature
-
Break out board for use with PT100 temperature sensors in 3D printers. PT100 temperature sensors maintain higher sensing accuracy over a wide range of temperatures than more commonly used sensors such as the ATC Semitec 104GT-2 thermistors. Please see below for further information. -
Cable Tie 98mm x 2.5mm (100 Pack)- Multi-purpose cable tie for many applications
- UV Resistant - Good for outdoor installations
-
Sale!
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. -
MR85 ball bearing:- Inner diameter: 5mm
- Outer diameter: 8mm
- Width: 2.5mm
- Heat resistant PTFE rubber seals
-
Out of stock
Voron 0.2 polycarbonate panel set - 3mm thickness. Includes:- front panel
- side panels
- top hat side panels - to suit 100mm extrusions
- top hat top panel
*Handle not included!
-
Original Bondtech OEM reverse extruder set of parts to use on the HextrudORT extruder from the HevORT project. Also compatible with the Sherpa Mini extruder by Annex Engineering Includes a set with the Hardened Steel R.I.D.G.A. and BMG original 1.75mm secondary Drive Gear. Please see below for further information and technical specifications. -
Vibration absorbing hard rubber 3D printer feet.- Material: EPDM
- Width: 36mm
- Depth: 17mm
- Load: 15kg
-
Light weight carbon fiber X gantry replacement for Voron 2 & Trident.
- Much lighter than aluminium extrusion
- Suits MGN12
- Rigid 2mm wall design
- includes mounting/installation hardware
-
Out of stock
The Phaetus Dragon hotend features:- Well-designed compact structure
- Superior thermal isolation of heatbreak
- Reinforced rigid structure
- High temperature resistance
-
Out of stock
Voron 0.2 Tophat Upgrade Kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
High temp silicone sock suitable for the Phaetus range of Rapido hotends. Available for high flow and ultra high flow models heatblock. -
Sale!Out of stock
Excellent series 9 piece hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- Long end of wrench can be used at upto 25 degree angle
- Multicolor wrenches with silkscreened printing of wrench sizes for easy identification. (for wrenches 2.5-10mm)
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Out of stock
Black LDO frame kit for the Voron Trident -
Out of stock
Voron 0 clear polycarbonate panel set - 3mm thickness. Includes:- front panel
- side panels
- top hat side panels
- top hat top panel
*Handle not included!
-
Out of stock
Designed for the following Open Source extruders:- HextrudORT;
- Sherpa Mini;
- Voron Mini StealthBurner.
Includes 2x MR85ZZ 5x8x2.5mm ball bearing Please see below for more information. -
Out of stock
Phaetus Rapido 2 Plus hotend features:- Completely new heatbreak designed for over 100kg abrasive filament lifetime
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Voron 0.2 ABS panels set- Laser cut for Voron 0
- Black ABS
- 3mm thickness
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
- Size: 22 AWG
- Length: 10m
- Color: Red
- Insulation: FEP
- Strands: 19
-
Out of stock
The Phaetus Dragon UHF features:- Ultra-high speed printing
- Ultra-thin titanium alloy heatbreak
- One-handed nozzle change
- Different flow rates, seamlessly switching
-
Out of stock
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head- Box-end tilt at 30 degree
- Thickness : 1.5mm only, ideal for work in a confined area
- Made of Stainless Steel
- Comes with a complete set with a key chain, 3.5mm to 8.0mm size
-
Voron 2 linear rail kit is a complete set of high quality stainless steel linear rails and carriages for the Voron 2 3D printer. Purchase includes:- 6x MGN9H rails
- 1x MGN12H rail
-
Out of stock
- Multicolored RGB backlight
- Dimensions: 104.99 x 47mm
- Power input: DC 5V
- SD card logic voltage: 3.3V/5V
- Compatible with marlin / klipper / reprap firmware
-
Sale!Out of stock
Excellent series 1.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Out of stock
These silicone bed heater mats were custom designed by Fermio Labs and made to spec by Keenovo. Scroll down below for more information and technical specifications. -
Out of stock
Integrated leadscrew stepper motor kit for Voron Trident Z assembly.- 1.8° Step Angle
- 1.68A
- 36Nm Holding Torque
- 40mm case
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below Disclaimer: All information is kept secure and will not be shared or sold to any third party. Read our Privacy Policy
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social