- Voltage: 3.3V-5V
- Compatible with 1.75mm filament
- Firmware: marlin2.0.x / klipper / reprap firmware
- Dimensions: 75 x 30mm
- Weight: 60g
-
Sale!Out of stock
BigTreeTech Smart Filament Sensor features: -
White bowden PTFE tube.- Inner diameter: 2.5mm
- Outer diameter: 4mm
-
Sale!Out of stock
- Linear guide rail length: 400mm
- Linear guide block type: Long
- Linear guide rail width: 12mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 2 - 350 spec
- Voron Trident - 350 spec
-
Out of stock
The IWISS 3220M features:- Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG
- Typical parallel crimping type ensures stability and power equalityand improves 30% of the crimping-tightness
- Double-layerWire Electrical discharge machining(EDM) Cutting jaw crimpsconductor and insulation sheath simultaneously-Only one time crimp needed
- Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR
- Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc
-
Out of stock
Vision Miner's Nano Polymer Adhesive is the most effective 3D printing glue on the market.- Works with any print surface
- Compatible with virtually all filaments
- Single application lasts from several to many consecutive prints
- Sample size available
-
Synchronous belt toothed idler suitable for up to 10mm wide Gates POWERGRIP® 2gt belts.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- 6061 Aluminium
- SKU: P20-2GT-10-A-P5-H14
-
Out of stock
UniqueABS filament is a high quality, high performance ABS made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- Suitable for use in and outdoors
-
Out of stock
Genuine Omron TL-Q5MC2 inductive proximity sensor- NC - Normally Closed operation
- 5mm sense distance
- Suitable for Voron 1 / 2 / Trident and others
-
Out of stock
LDO 42STH48-2804AH is a 48mm high power stepper motor by LDO Motors.- Model: 42STH48-2804AH
- 1.8° step
- 2.8A rated current
- Weight: 350g
-
Out of stock
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Specified fan for the Voron 2 and Trident 3D printer electronics cooling over the Raspberry Pi, control boards and stepper motor drivers.- 24v Rated Voltage
- 60mm length x 60mm height
- 20mm width
- 43 CFM airflow
- 0.46 in H2O air pressure
- Dual ball bearing
- 5000 RPM
- 28.05 dBa
-
Angled DIN-rail adapter for Wago mounting carrier allows for horizontal mounting orientation of the 221-500 carrier to DIN 35 rail.- Snap fit assembly to mounting carrier
- Snap fit mounting to 35mm DIN rail
-
ABS Panels for Voron 2.4- Laser cut for Voron 2.4
- Available: 250mm / 300mm / 350mm
-
Out of stock
Synchronous belt pulley suitable for Gates POWERGRIP® 2gt belts up to 10mm wide.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA20-2GT-10-P5-C-H20
-
Out of stock
White bowden PTFE tube.
- Inner diameter: 3mm
- Outer diameter: 4mm
-
Out of stock
This precision driver and bit set features:- Brand-new precision series, using two surface anodized treatment, anti-sweat and anti-corrosion.
- Aluminum alloy shell with 42 S2 bits and aluminum alloy handle with strong magnet for secure bit retention in the driver head.
- The handle is hidden in the center, and it can be ejected by lightly pressing.
- Bit storage box constructed from ABS with built-in strong magnet for secure driver retention when not in use.
- Push-type design, can be opened and closed by pressing.
- The driver is stored along with the bits
-
Sale!Out of stock
Micro-switch based probing assembly for 3D printers, lasers and CNC machines.- Highly accurate and consistent omron D2F-5 microswitch
- Magnetically coupled with screw fastened countersunk magnets
- Upto 80c operating temperature
-
This kinematic, Maxwell style bed mounting assembly, designed by whoppingpochard for the Voron 2 3D printer. Please see below for more information. -
The Bozzle Nozzle is a solid tungsten carbide hotend nozzle with M6 thread Suitable for any 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
48mm high power stepper motor by LDO Motors.- Model: 42STH48-2504AH
- 1.8° step
- 2.5A rated current
- Weight: 350g
-
Specified fan for the Voron 0.2 3D printer.- 24v Rated Voltage
- 30mm length x 30mm height
- 10mm width
- 1.85 CFM airflow
- 0.46 in H2O air pressure
- Dual ball bearing
- 9500 RPM
- 29.2 dBa
-
Out of stock
- Item Type: Stepper Motor Driver
- Current: 2.0
- Motor Voltage: 5.5...28V
- Logic Voltage: 3.3...5V
- Coil Current: 2.8A Peak
- Interface: Step/DIR/UART
- Extra Function: CoolStep and stallGuard
-
The XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 4
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
Get Social