- Laser cut
- 3mm thickness
- 2x Y axis
- 1x X axis
-
Out of stock
Titanium gantry backers suitable for both Voron 2 and Voron Trident 3D printers. -
Out of stock
General purpose lubricating grease prefilled into a 10ml syringe and needle combo. Made by CPC - manufacturers of high quality linear rails intended for use with linear rails and motion components. If being used in conjunction with our Fermio Linear Rails the grease can be applied directly through the carriage grease ports. Please see below for further information. -
Voron Cable chain set for Voron 2 and Voron Trident 3D printers.- XY chains: 10x11
- Z chain: 10x15
- Openable - outside open
- R18 bend radius
- Suits 250 / 300 / 350 sized machines
- Brand: CNWSL
-
Spherical bearings for the Voron Trident bed assembly and GE5C Z-joint mods on the Voron 2. Made by LS Bearings with a working temperature of upto 150c. Please see below for further information and technical details. -
- 24 AWG Silicon Wire
- 40M Total wire length (if individual wires are seperated)
-
Out of stock
This product has been superceded by the Galileo2 G2E Extruder kit here: https://uniqueprints.shop/shop/ldo/voron-galileo2-g2e-extruder-kit/ This is a component and parts kit for the Voron Galileo Extruder. A high precision, light weight, direct drive, planetary extruder system designed as a drop in replacement for the Voron Afterburner modular toolhead system. A design originally by Lorincz Robert and adapted to the Voron Design project by JaredCO1. Please see below for kit contents, assembly instructions and motor technical datasheet. Printable parts and further details for the Afterburner Clockwork assembly can be found here: https://github.com/JaredC01/Galileo -
Replacement heatbreak for the Phaetus Dragon range of hotends. Available in Standard and High Flow. -
Out of stock
The Phaetus Dragon hotend features:- Well-designed compact structure
- Superior thermal isolation of heatbreak
- Reinforced rigid structure
- High temperature resistance
-
Out of stock
GDSTIME GDA4010 axial fan is a high performance by fan manufacturer by GDSTIME.- 24v
- dual ball bearing
- 7500 RPM
- 8.29 CFM
-
Out of stock
Bootlace Ferrule Terminal Crimp Kit with an assortment of sizes and colors to suit many connectors and wire gauges. Crimping bootlace ferrules to wires is best done with dedicated ferrule crimping pliers. Kit includes 2120 pieces. Please see below for further information. -
Out of stock
High accuracy and high printing temperature sensor in a cartridge form factor. Suitable for 3D printing temperatures of upto 430°c. Compatible with:- E3D V6 Style hotends
- TL / Phaetus Dragon hotend
- Slice Mosquito
-
Light weight carbon fiber X gantry replacement for Voron 2 & Trident.- Much lighter than aluminium extrusion
- Suits MGN12
- Rigid 2mm wall design
- includes mounting/installation hardware
-
-
Strain relief plate for the 221-500 mounting carrier.- Snap fit to mounting carrier
-
Synchronous belt toothed idler suitable for Gates PowerGrip® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- Black anodisd finish
- 6061 Aluminium
- SKU: P20-2GT-6-A-P5-H10
-
Out of stock
Gdstime GDB5015 is high performance 5015 blower fan featuring:- 24v Rated Voltage
- 50mm length x 50mm height
- 15mm width
- 5.36CFM airflow
- 1.21 in H2O static pressure
- Ball bearing
- Blower type
- 6000 RPM
- Up to 70c operating temperature
- 50,000 hours operating life
-
Nickel plated copper hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
M3x10mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish -
Out of stock
Includes: 2x 0.9 degree 40mm 2A motors for X and Y axis 1x 1.8 degree 20mm 1A slim pancake motor for the afterburner toolhead. 4x 1.8 degree 48mm 2A motors for each corner of the Z axis X, Y and E motors are high temp, 180c insulation class. Please see below for further information and technical specifications for each of the motors. -
Out of stock
Filament runout sensor for 1.75mm filament by Triangle Labs. Installed between the filament spool and printer's filament extruder. Compatible with all 1.75mm 3D printer filaments. Please see below for further information and technical specifications. -
The Dragon hotend sock is a high temp silicone sock suitable for the Phaetus range of Dragon hotends. Fits both the standard and high flow model heatblocks. Available in Black or Orange. -
-
Out of stock
Precision high temp motor kit for Voron 1/2. Includes: 2x 0.9 degree motors for X and Y axis 1x 1.8 degree slim pancake motor for the afterburner toolhead. All motors are high temp, 180c insulation class. Please see below for further information and technical specifications. -
Deburring tool and blade set.- Includes 10 spare curved blades
- All metal construction
- Quick push to release latch for swapping blades
Get Social