- Laser cut for Voron 2.4
- Available: 250mm / 300mm / 350mm
-
Out of stock
ABS Panels for Voron 2.4 -
Ultra high flow nozzles manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends:- Dragon
- V6
- Mosquito
-
Out of stock
The Phaetus Dragon UHF features:- Ultra-high speed printing
- Ultra-thin titanium alloy heatbreak
- One-handed nozzle change
- Different flow rates, seamlessly switching
-
Out of stock
The Phaetus Dragon UHF features:
- Ultra-high speed printing
- Ultra-thin titanium alloy heatbreak
- One-handed nozzle change
- Different flow rates, seamlessly switching
-
Out of stock
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
- Cut for the Voron 2.4
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
XG Hotend is an assembled hotend for 3D printers from DropEffect, which is lightweight and high performance.- Very sharp temperature gradient
- Light, smart and efficient
- One-handed nozzle changes
- All-metal architecture
- Multiple mounting systems
- Optimised nozzle geometry
-
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
Voron Switchwire ABS panel set.- Laser cut
- Black ABS (Haircell pattern)
- 3mm Thickness
-
-
Voron Trident Fastener Kit. All bolts manufactured from high tensile alloy steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
ABS Panels for Voron 2.4
- Laser cut for Voron 2.4
- Available: 250mm / 300mm / 350mm
-
Out of stock
Phaetus Rapido 2 Plus hotend features:- Completely new heatbreak designed for over 100kg abrasive filament lifetime
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
Smaller, lighter, introducing the Revo Voron in collaboration with LDO. This is the hotend of choice for Voron 3D printers. E3D developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening! Package includes 2 Revo nozzles: 1x 0.4mm 1x 0.6mm -
Voron 2.4 Fastener Kit. All bolts manufactured from Grade A2, 304 Stainless Steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
Out of stock
Phaetus Rapido 2 Plus - Magenta Edition hotend features:- Completely new heatbreak designed for over 100kg abrasive filament lifetime
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
Includes: 2x 0.9 degree 40mm 2A motors for X and Y axis 1x 1.8 degree 20mm 1A slim pancake motor for the afterburner toolhead. 4x 1.8 degree 48mm 2A motors for each corner of the Z axis X, Y and E motors are high temp, 180c insulation class. Please see below for further information and technical specifications for each of the motors. -
Integrated leadscrew stepper motor kit for Voron Trident Z assembly.- 1.8° Step Angle
- 1.68A
- 36Nm Holding Torque
- 40mm case
-
Out of stock
Phaetus Rapido 2 Plus hotend features:
- Completely new heatbreak designed for over 100kg abrasive filament lifetime
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
Phaetus Rapido 2F hotend features:- New RCC coated all metal heatbreak for even more wear resistance
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
Smart Orbiter v3.0, a brand new innovative all in one dual drive extruder and hotend combo.The main mission of this design is the integration of the well proven Orbiter v2 concept into a lightweight all in one smart extruder.Why smart? This is the first extruder with integrated electronics. Together they make an excellent combination.Please see below for more information and technical specifications. -
Voron 2.4 Fastener Kit. All bolts manufactured from high tensile alloy steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
- Cut for the Voron 2.4
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Voron universal buildplate suitable for both Voron 2 and Trident 3D printers.- 250x250 mm
- 8mm thick
- cnc machined
- chamfer finish on all sides and edges
Get Social