-
M3x10mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish -
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
The Voron Tap upgrade is the latest release from the Voron Design team featuring:- physical nozzle probing
- drop in upgrade to existing Voron 2 and Trident 3D printers (mgn12 x-rail required)
- significantly more accurate than previous spec inductive sensors
-
Out of stock
Engineer TT-03 is a high quality set of hole tapping tools featuring:- For reaming holes in sheet metal, aluminum and similar material
- Material: Carbon steel
-
-
Sale!
Flat ribbon cable developed especially for high motion applications.- Temp-Flex High-Performance Flat-Ribbon Cable
- 20 Circuits
- 26 AWG
- Color: Green
-
Engineer DR-07 features:- L-shaped cushioned handle, ideal for work in a confined area
- 10-in-1 combination of driver bits, phillips, slotted and hex drives
- Bit set is separately available : Item No. DR-11
- Made in Japan
-
T8x4 Anti backlash leadscrew nuts in manufactured from POM (Delrin) material.- lower noise
- self lubricating
- long lasting
-
T8x2 leadscrew nuts in manufactured from POM (Delrin) material.- lower noise
- self lubricating
- long lasting
-
Out of stock
White bowden PTFE tube.- Inner diameter: 3mm
- Outer diameter: 4mm
-
Out of stock
Complete Voron 0 frame kit with upgraded Kirigami bed mounting assembly. Anodized and sandblasted in Black / Red / Blue / Space Grey colors. Please see below for more information and technical specifications. Please choose your desired color frame. -
Out of stock
- Engineer NZ-12G is ideal to cut an IC lead of a narrow-pitch QFP or SOP with a very sharp and slender shears (0.6mm width at the point)
- Flush cut of leads, prevents resist stripping or solder crack on a circuit board
- ESD-safe handles made of thermoplastic elastomer (TPR) for a comfort grip
- The cutting jaws are designed in parallel to the level of handles, unlike diagonal nippers, which helps users to reduce stress in work.
- NZ-12G with normal blades and NZ-13G with reversed blades
- Light weight of 35g only
- Made in Japan
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Black PEI film coated spring steel flex plate. Please see below for more information. Select your desired size: -
Light weight carbon fiber X gantry replacement for Voron 2 & Trident.- Much lighter than aluminium extrusion
- Suits MGN12
- Rigid 2mm wall design
- includes mounting/installation hardware
-
Out of stock
KUSBA is an all in one accelerometer solution to measure resonances for your 3D printer. With an integrated RP2040 mcu and onboard ADXL345 diy wiring and soldering is no longer required - just a USB-C to USB-A cable (included) Designed by xbst / Isik's Tech - every purchase directly supports his efforts for further research and development into this and other projects. Please see below for further information. -
The Bozzle Nozzle is a solid tungsten carbide hotend nozzle with M6 thread Suitable for any 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Sale!Out of stock
Excellent series 2.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
LDO-36STH17-0354AHG Extruder pancake stepper motor by LDO Motors.- Model: 36STH17-0354AHG
- 1.8° step
- 180c insulation class
- Weight: 70g
-
Extruder pancake stepper motor by LDO Motors developed specifically for the Sherpa line of extruders with an 8 tooth gear for increased extruder torque.
- Model: 36STH17-0354AH(G8T)
- 1.8° step
- 180c insulation class
- 8 tooth motor gear
- Weight: 70g
-
Sale!
Voron V2.4 kit 3D printer parts kit for the 250x250x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
Out of stock
XG Hotend is an assembled hotend for 3D printers from DropEffect, which is lightweight and high performance.- Very sharp temperature gradient
- Light, smart and efficient
- One-handed nozzle changes
- All-metal architecture
- Multiple mounting systems
- Optimised nozzle geometry
-
Plated copper hotend nozzle specifically designed for the XG Hotend by Dropeffect / Phaetus. Suitable for 1.75mm filament. Please see below for further information and technical specifications.
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below Disclaimer: All information is kept secure and will not be shared or sold to any third party. Read our Privacy Policy
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social