This is a custom made Voron 0 / Voron 0.1 frame kit with the Kirigami bed mounting assembly designed by Christopher Müller.

Frame Kit:

• 3mm wide t-slot width and compatible with MakerBeam T-Slot Nuts
• M3 size tapped threads
• 0.5mm thread pitch
• 10mm thread depth

All frame extrusions are sand-blasted and anodized after machining for a clean, matte appearance.

Extrusion length included – 120spec sized:

Machining:

• LCH75: horizontal through holes with 7.5 mm distance from left end face
• LCH295: horizontal through holes with 29.5 mm distance from left end face
• RCH75: horizontal through holes with 7.5 mm distance from right end face
• RCP75: crisscross through holes with 7.5 mm distance from right end face

Note: the specced extrusions previously used for the bed assembly have been omitted and replaced with the Kirigami bed mounting assembly.

Kirigami Bed Mounting Assembly:

Designed to replace the entire build plate support assembly on a Voron 0 with a significantly more rigid and stiff solution. Bolts directly to the to the linear rail carriages used for Z movement and eliminates printed parts from the bed assembly completely. A common source of first layer issues as the printed parts can creep and flex under heat and or load.

Additionally, the Kirigami bed mount can house upto six WAGO 2 way terminal blocks to streamline the build plate and heater wiring while providing additional quickconnect and disconnect functionality.

Includes:

• 1 pcs. laser-cut, bend, sand-blasted and painted Kirigami
• 8 pcs. M2 x 4mm button head screw (DIN912, CL12.9)
• 6 pcs. WAGO 221-412 terminals

The Kirigami bed mounting assembly was originally created and designed by Christopher Müller.

https://github.com/christophmuellerorg/voron_0_kirigami_bed

Please visit the Github repository for Kirigami specific printed parts and stls.