- Multi-purpose cable tie for many applications
- UV Resistant - Good for outdoor installations
-
Cable Tie 98mm x 2.5mm (100 Pack) -
Sale!
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. -
MR85 ball bearing:- Inner diameter: 5mm
- Outer diameter: 8mm
- Width: 2.5mm
- Heat resistant PTFE rubber seals
-
Out of stock
Voron 0.2 polycarbonate panel set - 3mm thickness. Includes:- front panel
- side panels
- top hat side panels - to suit 100mm extrusions
- top hat top panel
*Handle not included!
-
Original Bondtech OEM reverse extruder set of parts to use on the HextrudORT extruder from the HevORT project. Also compatible with the Sherpa Mini extruder by Annex Engineering Includes a set with the Hardened Steel R.I.D.G.A. and BMG original 1.75mm secondary Drive Gear. Please see below for further information and technical specifications. -
Vibration absorbing hard rubber 3D printer feet.- Material: EPDM
- Width: 36mm
- Depth: 17mm
- Load: 15kg
-
Light weight carbon fiber X gantry replacement for Voron 2 & Trident.- Much lighter than aluminium extrusion
- Suits MGN12
- Rigid 2mm wall design
- includes mounting/installation hardware
-
Out of stock
The Phaetus Dragon hotend features:- Well-designed compact structure
- Superior thermal isolation of heatbreak
- Reinforced rigid structure
- High temperature resistance
-
Out of stock
Voron 0.2 Tophat Upgrade Kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
High temp silicone sock suitable for the Phaetus range of Rapido hotends. Available for high flow and ultra high flow models heatblock. -
Sale!Out of stock
Excellent series 9 piece hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- Long end of wrench can be used at upto 25 degree angle
- Multicolor wrenches with silkscreened printing of wrench sizes for easy identification. (for wrenches 2.5-10mm)
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Out of stock
Black LDO frame kit for the Voron Trident -
Out of stock
Voron 0 clear polycarbonate panel set - 3mm thickness. Includes:- front panel
- side panels
- top hat side panels
- top hat top panel
*Handle not included!
-
Out of stock
Designed for the following Open Source extruders:- HextrudORT;
- Sherpa Mini;
- Voron Mini StealthBurner.
Includes 2x MR85ZZ 5x8x2.5mm ball bearing Please see below for more information. -
Out of stock
Phaetus Rapido 2 Plus hotend features:- Completely new heatbreak designed for over 100kg abrasive filament lifetime
- Removeable heater cartridge
- Latest revision removeable PT1000 thermistor
- 350c Max operating temperature (upgraded from 280c)
- Specially designed specifically for high-speed printing
- Convenient and easy to use with 1 handed nozzle changes
- Suitable for printing all types of filament
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Voron 0.2 ABS panels set- Laser cut for Voron 0
- Black ABS
- 3mm thickness
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
- Size: 22 AWG
- Length: 10m
- Color: Red
- Insulation: FEP
- Strands: 19
-
Out of stock
The Phaetus Dragon UHF features:- Ultra-high speed printing
- Ultra-thin titanium alloy heatbreak
- One-handed nozzle change
- Different flow rates, seamlessly switching
-
Out of stock
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head- Box-end tilt at 30 degree
- Thickness : 1.5mm only, ideal for work in a confined area
- Made of Stainless Steel
- Comes with a complete set with a key chain, 3.5mm to 8.0mm size
-
Voron 2 linear rail kit is a complete set of high quality stainless steel linear rails and carriages for the Voron 2 3D printer. Purchase includes:- 6x MGN9H rails
- 1x MGN12H rail
-
Out of stock
- Multicolored RGB backlight
- Dimensions: 104.99 x 47mm
- Power input: DC 5V
- SD card logic voltage: 3.3V/5V
- Compatible with marlin / klipper / reprap firmware
-
Sale!Out of stock
Excellent series 1.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Out of stock
These silicone bed heater mats were custom designed by Fermio Labs and made to spec by Keenovo. Scroll down below for more information and technical specifications. -
Out of stock
Integrated leadscrew stepper motor kit for Voron Trident Z assembly.- 1.8° Step Angle
- 1.68A
- 36Nm Holding Torque
- 40mm case
Get Social