Name: Unique Prints
Address: 15 Cochranes Rd, Moorabbin, Victoria, 3189, Australia

Sale!
Eight Tool TTR-S9 – 9 Piece Stubby Hexagon Wrench Set

Original price was: $59.95 AUD.Current price is: $50.96 AUD. inc GST
Excellent series 9 piece stubby hexagon wrench set.

Taper head on long end of wrench for effective pre-fastening and final tightening

The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces

The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers

Long end of wrench can be used at up to 25 degree angle

Sku: TTR-S9 Includes sizes:

1.5mm

2mm

2.5mm

3mm

4mm

5mm

6mm

8mm

10mm

Material: SNCM+V Alloy steel Hard-chrome plated finish. HRC: 53-60 Made in Japan.
Eight Tool TTR-S9 - 9 Piece Stubby Hexagon Wrench Set quantity

Details
Sale!
Eight Tool TTS-7 – 7 Piece Stubby Hexagon Wrench Set

Original price was: $54.45 AUD.Current price is: $46.28 AUD. inc GST
Excellent series 7 piece stubby hexagon wrench set.

Taper head on long end of wrench for effective pre-fastening and final tightening

The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces

The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers

Long end of wrench can be used at up to 25 degree angle

Sku: TTS-7 Includes sizes:

1.5mm

2mm

2.5mm

3mm

4mm

5mm

6mm

Material: SNCM+V Alloy steel Hard-chrome plated finish. HRC: 53-60 Made in Japan.
Eight Tool TTS-7 - 7 Piece Stubby Hexagon Wrench Set quantity

Details
Sale!
Eight Tool TTS-9 – 9 Piece Stubby Hexagon Wrench Set

Original price was: $65.45 AUD.Current price is: $55.63 AUD. inc GST
Excellent series 9 piece stubby hexagon wrench set.

Taper head on long end of wrench for effective pre-fastening and final tightening

The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces

The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers

Long end of wrench can be used at up to 25 degree angle

Sku: TTS-9 Includes sizes:

1.5mm

2mm

2.5mm

3mm

4mm

5mm

6mm

8mm

10mm

Material: SNCM+V Alloy steel Hard-chrome plated finish. HRC: 53-60 Made in Japan.
Eight Tool TTS-9 - 9 Piece Stubby Hexagon Wrench Set quantity

Details
Sale!
Eight Tool TXBH-S8 – 8 Piece Torx® Wrench Set

Original price was: $70.95 AUD.Current price is: $60.31 AUD. inc GST
Excellent series 8 piece Torx® wrench set with door style hanging holder.

Ball Point type TX wrench with borehole on both ends, originally designed by EIGHT

Knurled finish ensures less slippage and easy operation

Wrench long end can be used at upto 25 degree for standard cap screws

Sku: TXBH-S8 Includes sizes:

T8

T10

T15

T20

T25

T27

T30

T40

Material: SNCM+V Alloy steel Hard-chrome plated finish. HRC: 53-60 Made in Japan. *Tamper-resistant screws are usually made under special specifications - this product may or may not be suitable for all tamper-resistant screws.
Eight Tool TXBH-S8 - 8 Piece Torx® Wrench Set quantity

Details
Out of stock
Engineer DM-20 Precision Screwdriver Set

$30.25 AUD inc GST
6-in-1 set of phillips head precision screwdrivers in a portable plastic case

Blade made of tool steel alloy
Details
Out of stock
Engineer DM-30 Precision Screwdriver Set

$30.25 AUD inc GST
6-in-1 set of slotted head precision screwdrivers in a portable plastic case

Blade made of tool steel alloy
Details
Engineer DR-04 Stubby Ratchet Driver Set

$44.50 AUD inc GST
Engineer DR-04 is a stubby ratchet driver and bit set.

Compact 95mm body in length with a grip which fits in the palm

Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten

With a knurled chuck cover for quick ratchet spinning

DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10

Made in Japan
Engineer DR-04 Stubby Ratchet Driver Set quantity

Details
Engineer DR-06 Offset Ratchet Driver

$49.50 AUD inc GST
Engineer DR-06 features:

L-shaped metallic handle with a low-profile head, ideal for work in a confined area

Built-in ratchet mechanism increases work productivity

With a quick ratchet dial operated with a thumb for easy spinning

DR-06 with a 10-in-1 bit set in a bullet holder Phillips: #00, #1 & #2 Slotted: 4.5 & 6 mm Hex: 1.5, 2, 2.5, 3 & 4 Bit set is separately available: Item No. DR-11

Made in Japan
Engineer DR-06 Offset Ratchet Driver quantity

Details
Engineer DR-07 Twin Head Wrench Driver

$44.50 AUD inc GST
Engineer DR-07 features:

L-shaped cushioned handle, ideal for work in a confined area

10-in-1 combination of driver bits, phillips, slotted and hex drives

Bit set is separately available : Item No. DR-11

Made in Japan
Engineer DR-07 Twin Head Wrench Driver quantity

Details
Engineer NS-04 Side Cutter Micro Nipper

Rated 5.00 out of 5
$37.95 AUD inc GST
Engineer NS-04 features:

Compact body fitting well in the palm, ideal cutters for precise PCB work

Heat-treated for excellent cutting capacity and durability

Flush cut recommended for cutting copper and soft IC leads

Soft-touch handles and coiled spring ensure repeated and comfortable work.

Made in Japan.
Engineer NS-04 Side Cutter Micro Nipper quantity

Details
Out of stock
Engineer NSX-04 Micro Nippers

$30.25 AUD inc GST
Compact body fitting well in the palm, ideal cutters for precise PCB work

Heat-treated for excellent cutting capacity and durability

Flush cut recommended for cutting copper and soft IC leads

Soft-touch handles and coiled spring ensure repeated and comfortable work.

Made in Japan.
Details
Out of stock
Engineer NZ-12G ESD Safe Micro Nippers

$44.50 AUD inc GST
Engineer NZ-12G is ideal to cut an IC lead of a narrow-pitch QFP or SOP with a very sharp and slender shears (0.6mm width at the point)

Flush cut of leads, prevents resist stripping or solder crack on a circuit board

ESD-safe handles made of thermoplastic elastomer (TPR) for a comfort grip

The cutting jaws are designed in parallel to the level of handles, unlike diagonal nippers, which helps users to reduce stress in work.

NZ-12G with normal blades and NZ-13G with reversed blades

Light weight of 35g only

Made in Japan
Details
Out of stock
Engineer PA-06 Precision Wire Stripper

$54.45 AUD inc GST
The Engineer PA-06 Ultra high quality and high precision wire stripping tool.

made of carbon steel alloy for long tool life and durability

suitable for both solid and stranded wires

coiled return spring for smooth clamp action and release

easy tension setting and maintenance with a single joint screw

oil resistant elastomer (TPR) handle

Made in Japan

Please see below for further information and technical specifications
Details
Out of stock
Engineer PA-09 Precision Micro Terminal Crimping Pliers

Rated 5.00 out of 5
$81.95 AUD inc GST
Ultra high quality and high precision crimping pliers.

work with more than 100 different connector terminals

compatible MOLEX, TE (Tyco), JST, HRS and other connectors

4-different cavities of elaborate dies

Easy tension setting and maintenance with a single joint screw

locking latch when not in use

coiled return spring for smooth crimping action and release

oil resistant elastomer (TPR) handle

Made in Japan

Please see below for further information and technical specifications
Details
Out of stock
Engineer PA-24 Precision Micro Terminal Crimping Pliers

$86.50 AUD inc GST
Engineer PA-24 are an ultra high quality and high precision crimping pliers.

Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18

Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.

6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts

Built-in screw cutter (M2, M2.6 & M3)

Tapered and slender jaws, Light weight of 115g only

Spring loaded (on the back side), with locking latch for easy handling

Made in Japan

Please see below for further information and technical specifications
Details
Engineer PA-90 Wire Stripping Gauge Attachment

$19.25 AUD inc GST

Wire stripping attachment for Engineer PA-05 / PA-06 / PA-07 / PA-14 wire strippers. Used to accurately and consistently measure the length of wire to be stripped. Adjustable from 1mm - 24mm maximum.

Engineer PA-90 Wire Stripping Gauge Attachment quantity

Details
Out of stock
Engineer PAD-11 Precision Micro Terminal Crimping Tool

Rated 5.00 out of 5
$125.95 AUD inc GST
Engineer PAD-11 is an Ultra high quality and high precision crimping pliers with interchangeable crimping die.

Interchangeable die set for open-barrel contacts.

Easy replacement and perfect fitting to frame

Ergonomically-designed handles with strap hole

Equipped with wire stripper and cutter

2.5mm (Across flats) Hex key wrench included as standard accessory

Made in Japan

Please see below for further information and technical specifications
Details
Engineer PR-15 Long Nose Pliers

$32.45 AUD inc GST
Ultra high quality and durable multipurpose pliers.

made of high carbon steel for long tool life

features side cutting blades

rated to cut:

upto 2.0mm copper wire

upto 2.0mm2 stranded wire

upto 1.5mm steel wire

serrated inner long nose jaw

Made in Japan

Please see below for further information and technical specifications
Engineer PR-15 Long Nose Pliers quantity

Details
Out of stock
Engineer PS-03 Miniature Needle Nose Pliers

$43.45 AUD inc GST
Engineer PS-03 are high quality, precision needle nose pliers.

Half round shaped long nose, ideal for forming work

No serration on inner jaws makes these pliers suitable for sensitive and fragile components

coiled spring for smooth clamping and release action

ESD-Safe cushioned handles made of oil resistant thermoplastic elastomer (TPR)

Made in Japan

Please see below for further information and technical specifications
Details
Engineer PT-01 Precision Stainless Tweezers

$26.95 AUD inc GST
Ultra high precision stainless steel tweezers.

SUS304 Stainless Steel

anti-magnetic

anti-acid

anti-corrosive

Hardened points are finished accurately

tensioned shank provides stable spring action to prevent strain on the fingers

Made in Japan

Please see below for further information and technical specifications
Engineer PT-01 Precision Stainless Tweezers quantity

Details
Out of stock
Engineer PZ-57 Screw Removal Pliers

$39.50 AUD inc GST
The Engineer PZ-57 Screw Removal Pliers convenient for work on electronic devices. Small-sized 120mm body with ESD-safe handles

Ideal for removing stripped or special screws in small size

ESD-Safe handles made of thermoplastic elastomer featuring oil resistance

Grip end with strap hole

Used for Laptop, Mother board, Prototype Electronics, Mobile Phone, Game Console, RC toy, Drone, Character Figure and other electronic appliances.

Made in Japan

Please see below for further information and technical specifications
Details
Out of stock
Engineer SS-02 Solder Sucker

$38.90 AUD inc GST
Innovative Silicone nozzle-tipped, high-power, desoldering pump.

Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.

Withstand direct contact with soldering iron tip (max. 350℃)

Compact design made of aluminum body allows one handed operation.

Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)

Made in Japan
Details
Out of stock
Engineer SS-10 Connector Extractors

$22.50 AUD inc GST
Engineer SS-10 features:

Ideal for insertion or extraction of housing / cable connectors on PC boards

Helpful to extract Quad Op.-Amp (Operational Amplifier), too

Holds the connectors with the accurately-machined tips and pick them uprightly without damaging cables on the circuit board.

Made in Japan
Details
Out of stock
Engineer TS-04 Combination Slim Wrench Set

$48.95 AUD inc GST
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head

Box-end tilt at 30 degree

Thickness : 1.5mm only, ideal for work in a confined area

Made of Stainless Steel

Comes with a complete set with a key chain, 3.5mm to 8.0mm size

Made in Japan
Details

Special Offers

We aim to take the guesswork out of buying 3D printer parts and components.

We love 3D printing because of the unique nature of open source design philosophy and there’s nothing better than printing from a machine you’ve brought to life - just like the Voron 3D printer.

Get the latest news and specials from Unique Prints Shop

Save up to $3 per Polymaker PolyLite Filament Roll

Shop

Eight Tool TTR-S9 – 9 Piece Stubby Hexagon Wrench Set

Eight Tool TTS-7 – 7 Piece Stubby Hexagon Wrench Set

Eight Tool TTS-9 – 9 Piece Stubby Hexagon Wrench Set

Eight Tool TXBH-S8 – 8 Piece Torx® Wrench Set

Engineer DM-20 Precision Screwdriver Set

Engineer DM-30 Precision Screwdriver Set

Engineer DR-04 Stubby Ratchet Driver Set

Engineer DR-06 Offset Ratchet Driver

Engineer DR-07 Twin Head Wrench Driver

Engineer NS-04 Side Cutter Micro Nipper

Engineer NSX-04 Micro Nippers

Engineer NZ-12G ESD Safe Micro Nippers

Engineer PA-06 Precision Wire Stripper

Engineer PA-09 Precision Micro Terminal Crimping Pliers

Engineer PA-24 Precision Micro Terminal Crimping Pliers

Engineer PA-90 Wire Stripping Gauge Attachment

Engineer PAD-11 Precision Micro Terminal Crimping Tool

Engineer PR-15 Long Nose Pliers

Engineer PS-03 Miniature Needle Nose Pliers

Engineer PT-01 Precision Stainless Tweezers

Engineer PZ-57 Screw Removal Pliers

Engineer SS-02 Solder Sucker

Engineer SS-10 Connector Extractors

Engineer TS-04 Combination Slim Wrench Set

Polylite ABS (14)

Polylite ASA (11)

Buy More
Save More

Contact Info

Get Social

Legal Stuff

My Account

Payment Options

Shipping Partners

FREE Upgrade to Express Shipping for Australian orders over $150

Special Offers

We aim to take the guesswork out of buying 3D printer parts and components.

We love 3D printing because of the unique nature of open source design philosophy and there’s nothing better than printing from a machine you’ve brought to life - just like the Voron 3D printer.

Get the latest news and specials from Unique Prints Shop

Save up to $3 per Polymaker PolyLite Filament Roll

Shop

Save up to $3 per Polymaker PolyLite Filament Roll

Polylite ABS (14)

Polylite ASA (11)

Buy More Save More

Exclusive Special Offers and news delivered to your inbox!

Contact Info

Get Social

Legal Stuff

My Account

Payment Options

Shipping Partners

FREE Upgrade to Express Shipping for Australian orders over $150

Buy More
Save More