- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black Oxide finish
- 6061 Aluminium
- SKU: RLA20-2GT-10-P5-C-H20
-
Synchronous belt pulley suitable for Gates POWERGRIP® 2gt belts up to 10mm wide. -
Out of stock
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black Anodised finish
- 6061 Aluminium
- SKU: RLA20-2GT-6-P5-C-H16
-
Sale!
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. -
Out of stock
General purpose lubricating grease prefilled into a 10ml syringe and needle combo. Made by CPC - manufacturers of high quality linear rails intended for use with linear rails and motion components. If being used in conjunction with our Fermio Linear Rails the grease can be applied directly through the carriage grease ports. Please see below for further information. -
Out of stock
- Adjustable 2 piece design suitable for use with any spool size or width
- Anti-skid pads: There are anti-skid pads on the bottom to enhance friction.
- Easy to use: No tools required, easy and fast installation.
- Made of high quality ABS plastic, reliable quality and durable.
-
Out of stock
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head- Box-end tilt at 30 degree
- Thickness : 1.5mm only, ideal for work in a confined area
- Made of Stainless Steel
- Comes with a complete set with a key chain, 3.5mm to 8.0mm size
-
Out of stock
The Phaetus Dragon hotend features:- Well-designed compact structure
- Superior thermal isolation of heatbreak
- Reinforced rigid structure
- High temperature resistance
-
Out of stock
Voron TRIDENT 3D printer parts kit produced by LDO. Please select your preferred color frame. 3D Printed parts, assembly, hotend and Raspberry Pi are not included -
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 80 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- Height: 18mm
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA-80-2GT-6-P5-8-H18
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA20-2GT-6-P5-C-H16
-
Out of stock
Synchronous belt pulley suitable for Gates POWERGRIP® 2gt belts up to 10mm wide.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA20-2GT-10-P5-C-H20
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 16 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-6-P5-C-H15.5
-
Synchronous belt toothed idler suitable for up to 10mm wide Gates POWERGRIP® 2gt belts.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- 6061 Aluminium
- SKU: P20-2GT-10-A-P5-H14
-
Synchronous belt toothed idler suitable for Gates PowerGrip® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- 6061 Aluminium
- SKU: P20-2GT-6-A-P5-H10
-
White bowden PTFE tube.- Inner diameter: 3mm
- Outer diameter: 4mm
-
Out of stock
A laser cut and bent single piece bed concept to implement a lightweight and stiff bed assembly with full access to the mounting screws. This is revision 3 of the concept. Color: Black Anodised Original design by Christopher Müller. -
Different sizes set screws for Bondtech drive gears. M3x2 used with primary gear with inner diameter 5 mm. M3x3 used with 17 tooth gear in steel. M4x3 used with primary gear with inner diameter 8 mm. Class 12.9 high tensile steel quality. -
Out of stock
Replacement Shaft assembly with Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear. Bondtech SKU: 15021 Weight: 8g -
Spare part made of self lubricant high temperature plastic to replace a secondary gear on a Bondtech LGX™ Large Gears eXtruder. Weight: 10g -
Sale!
Voron 2.4 kit 350x350x350 3D printer parts kit. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
Out of stock
Black LDO frame kit for the Voron 2.4 -
Sale!
Voron 2.4 kit in 300x300x300 size 3D printer parts kit. Raspberry Pi, printed parts, hotend and assembly are NOT included.
-
Sale!
Green LDO frame kit for the Voron 2.4 -
Out of stock
Green LDO frame kit for the Voron 2.4
Get Social