- Ideal for removing stripped or special screws in small size
- ESD-Safe handles made of thermoplastic elastomer featuring oil resistance
- Grip end with strap hole
- Used for Laptop, Mother board, Prototype Electronics, Mobile Phone, Game Console, RC toy, Drone, Character Figure and other electronic appliances.
- Made in Japan
-
Out of stock
The Engineer PZ-57 Screw Removal Pliers convenient for work on electronic devices. Small-sized 120mm body with ESD-safe handles -
Engineer DR-06 features:- L-shaped metallic handle with a low-profile head, ideal for work in a confined area
- Built-in ratchet mechanism increases work productivity
- With a quick ratchet dial operated with a thumb for easy spinning
- DR-06 with a 10-in-1 bit set in a bullet holder Phillips: #00, #1 & #2 Slotted: 4.5 & 6 mm Hex: 1.5, 2, 2.5, 3 & 4 Bit set is separately available: Item No. DR-11
- Made in Japan
-
Engineer SS-10 features:- Ideal for insertion or extraction of housing / cable connectors on PC boards
- Helpful to extract Quad Op.-Amp (Operational Amplifier), too
- Holds the connectors with the accurately-machined tips and pick them uprightly without damaging cables on the circuit board.
- Made in Japan
-
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Engineer DR-07 features:- L-shaped cushioned handle, ideal for work in a confined area
- 10-in-1 combination of driver bits, phillips, slotted and hex drives
- Bit set is separately available : Item No. DR-11
- Made in Japan
-
- Engineer NZ-12G is ideal to cut an IC lead of a narrow-pitch QFP or SOP with a very sharp and slender shears (0.6mm width at the point)
- Flush cut of leads, prevents resist stripping or solder crack on a circuit board
- ESD-safe handles made of thermoplastic elastomer (TPR) for a comfort grip
- The cutting jaws are designed in parallel to the level of handles, unlike diagonal nippers, which helps users to reduce stress in work.
- NZ-12G with normal blades and NZ-13G with reversed blades
- Light weight of 35g only
- Made in Japan
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Sale!
Excellent series 2.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
IWISS HSC8 6-4 features:- Ergonomic Handle Design: Wire Ferrule Crimp Tool, engineering plastic double control plastic grip handle in accordance with human body mechanics design. Grip comfortable, durable anti-skid.
- Crimping Range: For insulated and uninsulated sleeve terminals, wire ferrule & end sleeves. This tool makes short work of terminals and connectors for electricians, contractors and builders.
- Self Adjustable Crimper Plier Tool: According to the requirements of the terminal, it automatically adjusts itself to the appropriate diameter for stripping, easy to operate.
-
The IWISS 3220M features:- Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG
- Typical parallel crimping type ensures stability and power equalityand improves 30% of the crimping-tightness
- Double-layerWire Electrical discharge machining(EDM) Cutting jaw crimpsconductor and insulation sheath simultaneously-Only one time crimp needed
- Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR
- Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc
-
Engineer NS-04 features:- Compact body fitting well in the palm, ideal cutters for precise PCB work
- Heat-treated for excellent cutting capacity and durability
- Flush cut recommended for cutting copper and soft IC leads
- Soft-touch handles and coiled spring ensure repeated and comfortable work.
-
The IWISS 2820M features:- Ultra-precise crimper ensures excellent and accurate crimps.
- Double-hinge mechanism that keeps the jaws parallel for a straight crimping engagement.
- IWS-2820M does many mini micro size U-barrel or stamped style terminals from AWG 28-20(0.08-0.5mm2).
- The package has detailed operation instructions, diagrams and applicable table for scan.
-
- Compact body fitting well in the palm, ideal cutters for precise PCB work
- Heat-treated for excellent cutting capacity and durability
- Flush cut recommended for cutting copper and soft IC leads
- Soft-touch handles and coiled spring ensure repeated and comfortable work.
-
Out of stock
-
6-in-1 set of phillips head precision screwdrivers in a portable plastic case
-
Blade made of tool steel alloy
-
-
Out of stock
-
6-in-1 set of slotted head precision screwdrivers in a portable plastic case
-
Blade made of tool steel alloy
-
-
Wire stripping attachment for Engineer PA-05 / PA-06 / PA-07 / PA-14 wire strippers. Used to accurately and consistently measure the length of wire to be stripped. Adjustable from 1mm - 24mm maximum. -
Engineer PAD-11 is an Ultra high quality and high precision crimping pliers with interchangeable crimping die.- Interchangeable die set for open-barrel contacts.
- Easy replacement and perfect fitting to frame
- Ergonomically-designed handles with strap hole
- Equipped with wire stripper and cutter
- 2.5mm (Across flats) Hex key wrench included as standard accessory
- Made in Japan
-
Sale!
Excellent series 5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Sale!
Excellent series 4mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Sale!
Excellent series 3mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Sale!
Excellent series 2mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Sale!
Excellent series 1.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Sale!
Standard series 5mm hexagon wrench.- Ball point on long end of wrench for quick pre-fastening and easy insertion into screw cap
- Long end of wrench can be used at upto 25 degree angle
- 016-158D
- 016-1510D
Get Social