- made of carbon steel alloy for long tool life and durability
- suitable for both solid and stranded wires
- coiled return spring for smooth clamp action and release
- easy tension setting and maintenance with a single joint screw
- oil resistant elastomer (TPR) handle
- Made in Japan
-
Out of stock
The Engineer PA-06 Ultra high quality and high precision wire stripping tool. -
Out of stock
Ultra high quality and high precision crimping pliers.- work with more than 100 different connector terminals
- compatible MOLEX, TE (Tyco), JST, HRS and other connectors
- 4-different cavities of elaborate dies
- Easy tension setting and maintenance with a single joint screw
- locking latch when not in use
- coiled return spring for smooth crimping action and release
- oil resistant elastomer (TPR) handle
- Made in Japan
-
Out of stock
Engineer PAD-11 is an Ultra high quality and high precision crimping pliers with interchangeable crimping die.- Interchangeable die set for open-barrel contacts.
- Easy replacement and perfect fitting to frame
- Ergonomically-designed handles with strap hole
- Equipped with wire stripper and cutter
- 2.5mm (Across flats) Hex key wrench included as standard accessory
- Made in Japan
-
Out of stock
Engineer PS-03 are high quality, precision needle nose pliers.- Half round shaped long nose, ideal for forming work
- No serration on inner jaws makes these pliers suitable for sensitive and fragile components
- coiled spring for smooth clamping and release action
- ESD-Safe cushioned handles made of oil resistant thermoplastic elastomer (TPR)
- Made in Japan
-
Out of stock
Engineer SS-10 features:- Ideal for insertion or extraction of housing / cable connectors on PC boards
- Helpful to extract Quad Op.-Amp (Operational Amplifier), too
- Holds the connectors with the accurately-machined tips and pick them uprightly without damaging cables on the circuit board.
- Made in Japan
-
Engineer NS-04 features:- Compact body fitting well in the palm, ideal cutters for precise PCB work
- Heat-treated for excellent cutting capacity and durability
- Flush cut recommended for cutting copper and soft IC leads
- Soft-touch handles and coiled spring ensure repeated and comfortable work.
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Out of stock
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head- Box-end tilt at 30 degree
- Thickness : 1.5mm only, ideal for work in a confined area
- Made of Stainless Steel
- Comes with a complete set with a key chain, 3.5mm to 8.0mm size
-
Out of stock
- Engineer NZ-12G is ideal to cut an IC lead of a narrow-pitch QFP or SOP with a very sharp and slender shears (0.6mm width at the point)
- Flush cut of leads, prevents resist stripping or solder crack on a circuit board
- ESD-safe handles made of thermoplastic elastomer (TPR) for a comfort grip
- The cutting jaws are designed in parallel to the level of handles, unlike diagonal nippers, which helps users to reduce stress in work.
- NZ-12G with normal blades and NZ-13G with reversed blades
- Light weight of 35g only
- Made in Japan
-
Ultra high precision stainless steel tweezers.- SUS304 Stainless Steel
- anti-magnetic
- anti-acid
- anti-corrosive
- Hardened points are finished accurately
- tensioned shank provides stable spring action to prevent strain on the fingers
- Made in Japan
-
Wire stripping attachment for Engineer PA-05 / PA-06 / PA-07 / PA-14 wire strippers. Used to accurately and consistently measure the length of wire to be stripped. Adjustable from 1mm - 24mm maximum. -
Out of stock
- Compact body fitting well in the palm, ideal cutters for precise PCB work
- Heat-treated for excellent cutting capacity and durability
- Flush cut recommended for cutting copper and soft IC leads
- Soft-touch handles and coiled spring ensure repeated and comfortable work.
-
Out of stock
The Engineer PZ-57 Screw Removal Pliers convenient for work on electronic devices. Small-sized 120mm body with ESD-safe handles- Ideal for removing stripped or special screws in small size
- ESD-Safe handles made of thermoplastic elastomer featuring oil resistance
- Grip end with strap hole
- Used for Laptop, Mother board, Prototype Electronics, Mobile Phone, Game Console, RC toy, Drone, Character Figure and other electronic appliances.
- Made in Japan
-
Out of stock
-
6-in-1 set of slotted head precision screwdrivers in a portable plastic case
-
Blade made of tool steel alloy
-
-
Out of stock
-
6-in-1 set of phillips head precision screwdrivers in a portable plastic case
-
Blade made of tool steel alloy
-
-
Engineer DR-06 features:- L-shaped metallic handle with a low-profile head, ideal for work in a confined area
- Built-in ratchet mechanism increases work productivity
- With a quick ratchet dial operated with a thumb for easy spinning
- DR-06 with a 10-in-1 bit set in a bullet holder Phillips: #00, #1 & #2 Slotted: 4.5 & 6 mm Hex: 1.5, 2, 2.5, 3 & 4 Bit set is separately available: Item No. DR-11
- Made in Japan
-
Engineer DR-07 features:- L-shaped cushioned handle, ideal for work in a confined area
- 10-in-1 combination of driver bits, phillips, slotted and hex drives
- Bit set is separately available : Item No. DR-11
- Made in Japan
-
Ultra high quality and durable multipurpose pliers.- made of high carbon steel for long tool life
- features side cutting blades
- rated to cut:
- upto 2.0mm copper wire
- upto 2.0mm2 stranded wire
- upto 1.5mm steel wire
- serrated inner long nose jaw
- Made in Japan
-
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
Get Social