Voron 2.4 DIY Kit – 350x350x350 – By UniquePrints
Original price was: $2,283.05 AUD.$2,049.50 AUDCurrent price is: $2,049.50 AUD. inc GST
10% Off
Only 1 left in stock (can be backordered)
Voron 2.4 kit 350x350x350 3D printer parts kit.
Raspberry Pi, printed parts, hotend and assembly are NOT included.
Only 1 left in stock (can be backordered)
Description
Voron 2.4 Kit update log 24/1/23:
- Omron inductive probe can now be substituted for a Voron Tap upgrade kit – please leave a note in your order.
- Includes CW2 round pancake stepper motor (LDO-36STH20-1004AHG)
- Includes PT1000 temperature sensor
- Includes 60w 24v hotend heater cartridge
- Includes Custom M1.5 – M6 size hex wrench set by Eight Tool – Made in Japan
Included Bill of Materials:
|
Fasteners
|
M5x40 SHCS | ||
| M5x30 BHCS | |||
| M5x16 BHCS | |||
| M5x10 BHCS | |||
| M4x6 BHCS | |||
| M3x40 SHCS | |||
| M3x30 SHCS | |||
| M3x20 SHCS | |||
| M3x16 SHCS | |||
| M3x12 SHCS | |||
| M3x8 SHCS | |||
| M3x6 BHCS | |||
| M3 Threaded Insert | |||
| M4 knurled nut | |||
| 5x10x1 Shim Ring | |||
| M3 Washer | |||
| M5 Hexnut | |||
| M3 Hexnut | |||
| M2x10 Self Tapping Screw for Plastics | |||
| M3 Hammer Head T-Nuts | |||
| 6mm x 3mm Round Neodymium Magnets | |||
| M3 T-nut HNTAJ5-3 | MISUMI HNTAJ5-3 – M3 T-NUT | ||
| M5 T-nut HNTAJ5-5 | MISUMI HNTAJ5-5 – M5 T-NUT | ||
|
Motion
|
GT2 Open Belt LL-2GT-6 (6mm wide) – Length Dependant on Config | ||
| GT2 Open Belt LL-2GT-9 (9mm wide) – Length Dependant on Config | |||
| GT2 Belt Loop (6mm wide) – 188mm | |||
| GT2 20T (6mm wide) Pulley (5mm bore) | |||
| GT2 16T (6mm wide) Pulley (5mm bore) | |||
| GT2 20T (9mm wide) Pulley (5mm bore) | |||
| GT2 20T (6mm wide) Toothed Idler (5mm bore) | |||
| GT2 20T (9mm wide) Toothed Idler (5mm bore) | |||
| GT2 80T (6mm wide) Pulley (5mm bore) | |||
| F695 2RS Bearing | |||
| 625 2RS Bearing | |||
| 5x60mm Shaft – Grind Flat | |||
| 5x30mm Shaft | |||
| Rails – 1x MGN12H 300/350/400 | |||
| Rails – 6x MGN9H 300/350/400 | |||
| Vibration Management | Printer Rubber Feet | Rubber Feet for Voron V1/V2 | |
|
Electronics / Wiring
|
Omron Mouse Button – Micro Switch | ||
| BAT85 Diode | |||
| Omron G3NA-210B-DC5 (10A) or Crydom D2425 (25A) or Crydom 84134000 (10A) SSR or Panasonic AQA211VL (15A) | |||
| Thermal Fuse | |||
| ZF – Rocker Switches DPST 16A ON-OFF | |||
| Fuse Medium Time Delay Acting 8A 250V Holder Cartridge 5 X 20mm Glass | |||
| TycoElectronics – 10EGG1-2 (Normal) or 10EHG1-2 (Medical): Filtered Power Inlet | |||
| Power Inlet & Rocker Switch | |||
| Fork Spade Terminal | |||
| Insulated Crimp Receptical | |||
| Nylon Cable Ties 4″ | |||
| MicroFit3 Male Pin (43031-0007) | |||
| MicroFit3 Female Pin (43030-0007) | |||
| MicroFit Connector Receptacle 4 Position (43645-0400) | |||
| MicroFit Connector Receptacle 3 Position (43645-0300) | |||
| MicroFit Connector Receptacle 2 Position (43645-0200) | |||
| MicroFit Connector Plug 4 Position (43640-0401) | |||
| MicroFit Connector Plug 3 Position (43640-0301) | |||
| MicroFit Connector Plug 2 Position (43640-0201) | |||
| MLX Power Receptacle 3 Position (50-84-2030) | |||
| MLX Power Plug 3 Position (50-84-1030) | |||
| MLX Male Pin (02-08-2004) | |||
| MLX Female Pin (02-08-1002) | |||
| JST-XH Female Pin | |||
| JST-XH Connector Plug 4 Position | |||
| JST-XH Connector Plug 3 Position | |||
| JST-XH Connector Plug 2 Position | |||
| Probe | Omron Probe TL-Q5MC2 OR Voron TAP | ||
|
Cables – Wire
|
22AWG PTFE wire (250ft total) | FEP 4 COLOR 22AWG WIRE KIT | |
| 18AWG Silicone Cable (10ft total) | FEP 3 Color 18AWG Wire Kit | ||
| Cables – Chain | Complete X/Y/Z Chain openable chain set | VORON CABLE CHAIN KIT | |
|
Electronics
|
NEMA17 Motor 17HS19-2004S | VORON 2 FULL MOTOR KIT by LDO | |
| Din Rail (different size for each printer) | DIN RAIL 35MM X 7.5MM 420MM | ||
| Mean Well LRS-200-24 PSU | MEANWELL LRS-200-24 | ||
| 60x60x20 Axial Fan (24V) | GDSTIME 6020 Axial Fan | ||
| 40x40x10 Axial Fan- Ball Bearing (24V) | SUNON 4010 Axial Fan | ||
| RaspberryPi4 | NA | ||
| MicroSD Card | NA | ||
| USB C Power Cable | NA | ||
| SKR 1.4 | BTT Octopus Pro | ||
| TMC2209 Stepper Motor Driver | BTT 2209×7 | ||
| Mini 12864 Display (Type B) | Mini 12864 Display | ||
| Frame | FRAME with Angled Corner Connectors | VORON 2.4 FRAME KIT by LDO | |
|
Misc
|
Bowden Tube (4mm OD, ID depends on extruder type) | Bowden PTFE Tube x3 | |
| Bowden Coupler (for 4mm OD tube) | Pneumatic Bowden Coupler Fitting 1.75mm | ||
| Foam Panel Tape (5mm wide / 3mm thick) | Raven RP59 Insulating Foam x 2 | ||
| BMG Extruder Hardware Kit | BMG Extruder Component Kit | ||
|
Panels
|
Black Panels (ABS) – Back / Deck / Bottom | ABS Panels: Voron 2.4 | |
| Clear Panels (PC) – Front / Sides / Top | PC Panels: Voron 2.4 | ||
|
Buildplate
|
Aluminum Build Plate | VORON UNIVERSAL BUILD PLATE | |
| Silicone AC Heater | V1/V2/VT Fermio Labs Bed Heater Mat | ||
| Flex Plate | VORON POWDERCOATED PEI SPRING STEEL FLEX PLATE | ||
| Build plate magnet | HIGH TEMP MAGNETIC SHEET – Graviflex® 200 | ||
| Extras | Stealthburner 5015 Fan | SUNON MF50151VX 12v Blower Fan | |
| Extras | Hotend Heater | 60W 24v HOTEND HEATER CARTRIDGE | |
| Extras | Hotend Thermistor | PT1000 TEMPERATURE SENSOR | |
| Extras | Tools – Eight Tool Hex Wrench Set – Made in Japan. | Custom set in Voron specific sizes M1.5 – M6 | |
| Extras | Bowden PTFE Tube 3mm ID – 3 metres | Bowden PTFE Tube 3mm ID – 3 metres | |
| Extras | Din Rail (different size for each printer) | DIN RAIL 35MM X 7.5MM 420MM | |
| Extras | LED set of 4 for the toolhead | NA | |
| Extras | FEP 2 Color 30AWG Wire Kit | NA | |
Reviews
There are no reviews yet.