- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: P20-2GT-10-A-P5-H14
-
Out of stock
Synchronous belt toothed idler suitable for up to 10mm wide Gates POWERGRIP® 2gt belts. -
Synchronous belt smooth idler suitable for up to 10mm wide 2gt belts.- 11mm wide
- 5mm inner bore diameter
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: D12-10-A-P5-H14
-
- Item Type: Stepper Motor Driver
- Current: 2.0
- Motor Voltage: 5.5...28V
- Logic Voltage: 3.3...5V
- Coil Current: 2.8A Peak
- Interface: Step/DIR/UART
- Extra Function: CoolStep and stallGuard
-
Raspberry Pi display cable and ideal for tight spaces. Flexible flat cable (ffc) Length: 500mm Please see below for more details and technical specifications. -
Raspberry Pi display cable and ideal for tight spaces. Flexible flat cable (ffc) Length: 1000mm Please see below for more details and technical specifications.
-
Sale!
Excellent series 3mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
- Compatible with several series of SSR used in 3D printers (Omron G3NE / G3NA, Sensata Crydom Series 1)
- For use with 35mm x 7.5mm din rails
- All metal construction for additional heat dissipation
-
Spherical bearings for the Voron Trident bed assembly and GE5C Z-joint mods on the Voron 2. Made by LS Bearings with a working temperature of upto 150c. Please see below for further information and technical details. -
Sale!
Excellent series 4mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Out of stock
Replacement Shaft assembly with Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear. Bondtech SKU: 15021 Weight: 8g -
Spare part made of self lubricant high temperature plastic to replace a secondary gear on a Bondtech LGX™ Large Gears eXtruder. Weight: 10g -
Out of stock
Omron DWHL-C203MR General purpose switch- Alternative sensing option for Voron TAP
- Pin plunge actuator
- Rated Voltage: 5 VDC 1mA to 12 VDC 2A
- Operating Temperature: Upto 85c
-
Sale!
Genuine gates synchronous belt for 2GT/GT2 pulleys. Belt width: 9mm Tooth Pitch: 2mm To be paired with 9mm 2GT pulleys and idlers. Price is per 1M of belt length and is shipped as 1 piece x amount of metres purchased. -
Out of stock
Spare part made of self lubricant high temperature plastic to replace a primary gear on a Bondtech LGX™ Large Gears eXtruder. Bondtech SKU: 15070 -
Raven RP59 is a self adhesive EPDM rubber well helps in keeping the heat and vibrational noise inside the printer chamber. Includes 5m total length at a 9mm width. Available in White, Grey and Brown Please see below for further information. -
T8x2 leadscrew nuts in manufactured from POM (Delrin) material.- lower noise
- self lubricating
- long lasting
-
Out of stock
T8x4 leadscrew nuts in manufactured from POM (Delrin) material.
- lower noise
- self lubricating
- long lasting
-
T8x8 leadscrew nuts in manufactured from POM (Delrin) material.
- lower noise
- self lubricating
- long lasting
-
Sale!
Excellent series 5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
- 60watt allows for much faster hotend heating
- Length: 20mm
- Width: 6mm
- Wire length: 100cm
- Compatible with:
- E3D style heatblock
- Mosquito heatblock
- Dragon heatblock
-
Out of stock
Spherical bearings for the Voron Trident and GE5C mods on the Voron 2.Discontinued in Stock Item
Similar Item: GE5C Spherical Bearing Please see below for further information and technical details. -
-
Out of stock
Raven RP59 is a self adhesive EPDM rubber well helps in keeping the heat and vibrational noise inside the printer chamber. Includes 5m total length at a 9mm width. Available in White, Grey and Brown Please see below for further information.
-
Raven RP59 is a self adhesive EPDM rubber well helps in keeping the heat and vibrational noise inside the printer chamber. Includes 5m total length at a 9mm width. Available in White, Grey and Brown Please see below for further information.
Get Social