-
Hardened and precision ground shafts for the filament drive gear kits and extruder assembly. Please select your required size. -
Ultra high quality and durable multipurpose pliers.- made of high carbon steel for long tool life
- features side cutting blades
- rated to cut:
- upto 2.0mm copper wire
- upto 2.0mm2 stranded wire
- upto 1.5mm steel wire
- serrated inner long nose jaw
- Made in Japan
-
Sale!
Excellent series 9 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Sale!
Excellent series 8 piece Torx® wrench set with door style hanging holder.- Ball Point type TX wrench with borehole on both ends, originally designed by EIGHT
- Knurled finish ensures less slippage and easy operation
- Wrench long end can be used at upto 25 degree for standard cap screws
- T8
- T10
- T15
- T20
- T25
- T27
- T30
- T40
-
-
Spare part made of self lubricant high temperature plastic to replace a secondary gear on a Bondtech LGX™ Large Gears eXtruder. Weight: 10g -
Engineer DR-07 features:- L-shaped cushioned handle, ideal for work in a confined area
- 10-in-1 combination of driver bits, phillips, slotted and hex drives
- Bit set is separately available : Item No. DR-11
- Made in Japan
-
-
Out of stock
Complete Voron 0 frame kit with upgraded Kirigami bed mounting assembly. Anodized and sandblasted in Black / Red / Blue / Space Grey colors. Please see below for more information and technical specifications. Please choose your desired color frame. -
Bare spring steel flex plate for use with alternative print surfaces or specialty materials. Please see below for more information. -
Smooth PEI film coated spring steel flex plate. Please see below for more information. Select your desired size: -
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
These silicone bed heater mats were custom designed by Fermio Labs and made to spec by Keenovo. Scroll down below for more information and technical specifications. -
Out of stock
ABS Panels for Voron 2.4- Laser cut for Voron 2.4
- Available: 250mm / 300mm / 350mm
-
Dragon UHF heatbreak replacement part. Available in Standard and High Flow and Ultra High Flow. -
115 ball bearing:- Inner diameter: 5mm
- Outer diameter: 11mm
- Width: 4mm
- Heat resistant PTFE rubber seals
-
Engineer DR-06 features:- L-shaped metallic handle with a low-profile head, ideal for work in a confined area
- Built-in ratchet mechanism increases work productivity
- With a quick ratchet dial operated with a thumb for easy spinning
- DR-06 with a 10-in-1 bit set in a bullet holder Phillips: #00, #1 & #2 Slotted: 4.5 & 6 mm Hex: 1.5, 2, 2.5, 3 & 4 Bit set is separately available: Item No. DR-11
- Made in Japan
-
- Manufacturer: CPC
- Linear guide rail length: 300mm
- Linear guide block type: Long
- Linear guide rail width: 12mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 2 - 250 spec
- Voron Trident - 250 spec
-
Sale!
The JST XHP-2 XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 2
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
- 100pcs
-
Cable Tie 98mm x 2.5mm (100 Pack)- Multi-purpose cable tie for many applications
- UV Resistant - Good for outdoor installations
-
Out of stock
Integrated leadscrew stepper motor kit for Voron 1.8 Z assembly.- 1.8° Step Angle
- 1.68A
- 36Nm Holding Torque
- 40mm case
-
Out of stock
Black LDO frame kit for the Voron 1.8 Please select your appropriate size. -
Out of stock
Included in this listing is a functional set of parts for the latest release of the Voron 2.4. Includes all functional parts and your choice of toolhead and control board bracket parts. All parts printed in ABS and/or ASA. Please see: -below for a full list of the parts included -photos for the color combination (gold base, black accent) Please advise of the hotend and control boards that you will be using for the relevant parts to be included in your parts kit: -
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social