- physical nozzle probing
- drop in upgrade to existing Voron 2 and Trident 3D printers (mgn12 x-rail required)
- significantly more accurate than previous spec inductive sensors
-
The Voron Tap upgrade is the latest release from the Voron Design team featuring: -
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
M3x10mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish -
Out of stock
Btt Pi TFT 50- Compatible with Raspberry Pi - Connects to Raspberry Pi via DSI interface
- Special hole design - It makes installation of Raspberry Pi more robust
- Adjustable brightness - Easy and convenient
- Responsive touch control
- Size: 121mm*76mm
- Display area: 108*61.8mm
- Number of screen backlights: 18-LED
-
Btt Pi TFT 70- Compatible with Raspberry Pi - Connects to Raspberry Pi via DSI interface
- Special hole design - It makes installation of Raspberry Pi more robust
- Adjustable brightness - Easy and convenient
- Responsive touch control
- Size: 165mm*100mm
- Display area: 154*86mm
- Number of screen backlights: 27-LED
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech for hotend with Volcano style heatblocks. Designed for 1.75mm filament and compatible with 2.85mm filament. Please see below for further information and technical specifications. -
Out of stock
The APUS Extruder by Phaetus is an all new extrusion system designed to be powerful, lightweight and versatile with multiple mounting options and support for a large variety of hotends available on the market. Featuring an all metal construction that serves to both enhance rigidity as well as improving heat dissipation for the extruder motor. Please see below for further information, user instructions and technical specifications. -
Sale!Out of stock
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. -
Out of stock
Bootlace Ferrule Terminal Crimp Kit with an assortment of sizes and colors to suit many connectors and wire gauges. Crimping bootlace ferrules to wires is best done with dedicated ferrule crimping pliers. Kit includes 2120 pieces. Please see below for further information. -
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
-
BTT Pi TFT 43- Compatible with Raspberry Pi - Connects to Raspberry Pi via DSI interface
- Special hole design - It makes installation of Raspberry Pi more robust
- Adjustable brightness - Easy and convenient
- Responsive touch control
- Size: 105.5mm*67mm
- Display area: 95.04*53.856mm
- Number of screen backlights: 16-LED
-
HIWIN X Rail for Voron0 - MGN7H 150mm Z1 Preload- Linear guide rail length: 150mm
- Linear guide block type: Long/Standard
- Linear guide rail width: 7mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 0 / 0.1 / 0.2
- Preload: Z1
- SKU: MGN7H1R150Z1CM
-
Out of stock
Voron 0.2 Tophat Upgrade Kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Out of stock
Picobilical kit is composed of the Toolhead PCB, Frame PCB, and Umbilical Cable - which connects the two PCBs.- Rear mounted toolhead PCB simplifies toolhead wiring.
- The umbilical cable can be easily detatched from the toolhead - allowing the toolhead to be completely decoupled during maintenance.
- On-board RP2040 microcontroller frees up ports in the main controller while greatly simplifying wiring.
- Integrated 24V to 5V buck converter with max 5A output eliminates the need for an external 5V buck converter for the Raspberry Pi.
- Two independent neopixel ports.
- Selectable supply voltage (24V or 5V) for part fan and hotend fan.
- On-board thermistor for chamber temperature monitoring.
- Optional filament sensor input.
-
Omron DWHL-C203MR General purpose switch- Alternative sensing option for Voron TAP
- Pin plunge actuator
- Rated Voltage: 5 VDC 1mA to 12 VDC 2A
- Operating Temperature: Upto 85c
-
The Voron Trident Linear Rail Kit is a complete set of high quality stainless steel linear rails and carriages for the Voron Trident 3D printer. Purchase includes:- 5x MGN9H rails
- 1x MGN12H rail
-
Out of stock
Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder:- LGX;
- LGX Lite;
- LGX Lite Mirrored.
- with thicker mounting plates;
- at higher environment temperatures;
- at higher stepper motor currents.
-
Out of stock
Bondtech integrated drive gear assembly includes:- Main shaft;
- Main gear;
- Primary drive gear.
-
Out of stock
Smaller, lighter, introducing the Revo Voron in collaboration with LDO. This is the hotend of choice for Voron 3D printers. E3D developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening! Package includes 2 Revo nozzles: 1x 0.4mm 1x 0.6mm -
White bowden PTFE tube.- Inner diameter: 2.5mm
- Outer diameter: 4mm
-
Out of stock
White bowden PTFE tube.- Inner diameter: 2.5mm
- Outer diameter: 4mm
Get Social