- 16 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: RLA16-2GT-6-P5-C-H15.5
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts. -
Out of stock
- Engineer NZ-12G is ideal to cut an IC lead of a narrow-pitch QFP or SOP with a very sharp and slender shears (0.6mm width at the point)
- Flush cut of leads, prevents resist stripping or solder crack on a circuit board
- ESD-safe handles made of thermoplastic elastomer (TPR) for a comfort grip
- The cutting jaws are designed in parallel to the level of handles, unlike diagonal nippers, which helps users to reduce stress in work.
- NZ-12G with normal blades and NZ-13G with reversed blades
- Light weight of 35g only
- Made in Japan
-
T8x4 Anti backlash leadscrew nuts in manufactured from POM (Delrin) material.- lower noise
- self lubricating
- long lasting
-
Replacement heatbreak for the Phaetus Dragon range of hotends. Available in Standard and High Flow. -
Out of stock
Tungsten carbide and copper allow hotend nozzle suitable for any 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Sale!
Molex 43030-0007 - Micro-Fit 3.0 43030 Series- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
- 100 pcs
-
Out of stock
UHP-350-24 is a 350W, 24V single-output, slim type enclosed power supply with 31mm low profile design. 90-264VAC input. The UHP series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:- Voron and other 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
- LED display applications
-
PiCAN is an open-source STM32F072 based USB to CAN bus adapter, shaped like a USB drive. This form factor saves space and simplifies wiring inside your 3D printer. Developed for use with Klipper by Xbst. Each purchase directly supports the continued development of this and other projects. Please see below for more information. -
Out of stock
Galileo2 G2E Extruder vs Galileo1:- A full redesign, moving to a 9:1 gear ratio and optimizing the gearbox design over Galileo 1.
- Custom 9T stepper with a taller spur gear resulting in 20% higher contact surface
- Proper meshing of gears which gives even loading on the planets / sun gear and improves wear characteristics and power transfer.
-
Out of stock
Integrated leadscrew stepper motor kit for Voron Trident Z assembly.- 1.8° Step Angle
- 1.68A
- 36Nm Holding Torque
- 40mm case
-
Out of stock
These silicone bed heater mats were custom designed by Fermio Labs and made to spec by Keenovo. Scroll down below for more information and technical specifications. -
Sale!Out of stock
Excellent series 1.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
-
Out of stock
- Multicolored RGB backlight
- Dimensions: 104.99 x 47mm
- Power input: DC 5V
- SD card logic voltage: 3.3V/5V
- Compatible with marlin / klipper / reprap firmware
-
Voron 2 linear rail kit is a complete set of high quality stainless steel linear rails and carriages for the Voron 2 3D printer. Purchase includes:- 6x MGN9H rails
- 1x MGN12H rail
-
Out of stock
Engineer TS-04 are an 8-in-1 Combination Spanner Set with very thin shank & head- Box-end tilt at 30 degree
- Thickness : 1.5mm only, ideal for work in a confined area
- Made of Stainless Steel
- Comes with a complete set with a key chain, 3.5mm to 8.0mm size
-
Out of stock
The Phaetus Dragon UHF features:- Ultra-high speed printing
- Ultra-thin titanium alloy heatbreak
- One-handed nozzle change
- Different flow rates, seamlessly switching
-
- Size: 22 AWG
- Length: 10m
- Color: Red
- Insulation: FEP
- Strands: 19
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
Out of stock
Innovative Silicone nozzle-tipped, high-power, desoldering pump.- Soldering point can be covered with the elastic silicone nozzle, suck up melted solder efficiently with less residue.
- Withstand direct contact with soldering iron tip (max. 350℃)
- Compact design made of aluminum body allows one handed operation.
- Comes with 1 pce. of 50 mm spare silicone tube (free-cut type)
- Made in Japan
-
Out of stock
Engineer PA-24 are an ultra high quality and high precision crimping pliers.- Specialty of 2.5mm pitch connector contacts of different connector manufacturers, works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18
- Perfectly crimps triangular insulation barrel (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc. without damaging the insulations.
- 6 Crimping Dies ('m'-shaped crimp: 1.3, 1.6, 1.9 & 2.2mm in width & Round crimp: φ1.4 & φ1.8mm) for open-barrel contacts
- Built-in screw cutter (M2, M2.6 & M3)
- Tapered and slender jaws, Light weight of 115g only
- Spring loaded (on the back side), with locking latch for easy handling
- Made in Japan
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Voron 0.2 ABS panels set- Laser cut for Voron 0
- Black ABS
- 3mm thickness
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Out of stock
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
Get Social