- Number of positions: 4
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
- 100pcs
-
Sale!
The JST XHP-4 XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors. -
Sale!
The JST XHP-3 XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 3
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
- 100pcs
-
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
Sale!Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Out of stock
Voron 0.2 tophat upgrade kit by LDO Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Sale!Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
- Cut for the Voron 2.4
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Sale!Out of stock
Voron 0.2 tophat upgrade kit by LDO - Rev.B Includes:- Tophat extrusions - 100mm length
- Tophat 3mm clear acrylic panels
- New deck and bottom panels in black acrylic
- assorted fasteners
- 3010, 24v LDO fan
-
Raven RP59 is a self adhesive EPDM rubber well helps in keeping the heat and vibrational noise inside the printer chamber. Includes 5m total length at a 9mm width. Available in White, Grey and Brown Please see below for further information. -
Tungsten carbide and copper allow hotend nozzle suitable for any 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Vibration absorbing hard rubber 3D printer feet.- Material: EPDM
- Width: 36mm
- Depth: 17mm
- Load: 15kg
-
Ultra high flow nozzles manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends:- Dragon
- V6
- Mosquito
-
Complete Voron 0 frame kit with upgraded Kirigami bed mounting assembly. Anodized and sandblasted in Black / Red / Blue / Space Grey colors. Please see below for more information and technical specifications. Please choose your desired color frame. -
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details. -
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details.
-
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details.
-
Voron Trident kit - 3D printer parts kit for the 350x350x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
Sale!
Voron Trident kit - 3D printer parts kit for the 300x300x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included.
-
Sale!
Voron Trident kit - 3D printer parts kit for the 250x250x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included.
-
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Sale!
Voron V2.4 kit 3D printer parts kit for the 250x250x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
- Size: 22 AWG
- Length: 10m
- Color: Brown
- Insulation: FEP
- Strands: 19
-
Out of stock
Green LDO frame kit for the Voron 2.4 -
Sale!
Black LDO frame kit for the Voron 2.4 -
M3x12mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M5x10mm Button Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M5x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x20mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x16mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x30mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
Fastener kit for the Voron 1.8 3D printer. All bolts manufactured from Grade A2, 304 Stainless Steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
LRS-200-48 is a 200W, 48V single-output, enclosed type power supply with 30mm low profile design. 115VAC or 230VAC input (select by switch). The LRS series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
-
115 ball bearing 10 pack:- Inner diameter: 5mm
- Outer diameter: 11mm
- Width: 4mm
- Heat resistant PTFE rubber seals
- Quantity: 10 pieces
-
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
ABS panels Voron Trident:- Laser cut for Voron Trident
- Available: 250mm / 300mm / 350mm
- 3mm thick
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Nickel plated copper hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Complete Voron 0 frame kit with upgraded Kirigami bed mounting assembly. Anodized and sandblasted in Black / Red / Blue / Space Grey colors. Please see below for more information and technical specifications. Please choose your desired color frame.
-
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech for hotend with Volcano style heatblocks. Designed for 1.75mm filament and compatible with 2.85mm filament. Please see below for further information and technical specifications. -
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech for hotend with Volcano style heatblocks. Designed for 1.75mm filament and compatible with 2.85mm filament. Please see below for further information and technical specifications.
-
The Voron Trident Linear Rail Kit is a complete set of high quality stainless steel linear rails and carriages for the Voron Trident 3D printer. Purchase includes:- 5x MGN9H rails
- 1x MGN12H rail
-
Blue LDO frame kit for the Voron Trident -
Black LDO frame kit for the Voron Trident -
The Voron Trident Linear Rail Kit is a complete set of high quality stainless steel linear rails and carriages for the Voron Trident 3D printer. Purchase includes:
- 5x MGN9H rails
- 1x MGN12H rail
-
Sale!
Green LDO frame kit for the Voron 2.4
-
Sale!
Green LDO frame kit for the Voron 2.4
-
Sale!
Red LDO frame kit for the Voron 2.4 -
Sale!
Blue LDO frame kit for the Voron 2.4 -
Sale!
Standard series 8 piece hexagon wrench set with door holder case for convenient hanging storage. Sku: 016-158D Includes sizes:- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
-
M4x6mm Button Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x30mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
- Manufacturer: CPC
- Linear guide rail length: 300mm
- Linear guide block type: Long
- Linear guide rail width: 9mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 2 - 250 spec
- Voron Trident - 250 spec
-
Out of stock
Included in this listing is a full set of parts for the latest release of the Voron Zero (V0.1) with a mini-afterburner toolhead for a dragon hotend. Includes top hat and all panel mounting components for 3mm panels. All parts printed in ABS and/or ASA. Please see: -below for a full list of the parts included -photos for the color combination (gold base, black accent) -
Out of stock
Included in this listing is a full set of parts for the latest release of the Voron Zero (V0.1) with a mini-afterburner toolhead for a dragon hotend. Includes top hat and all panel mounting components for 3mm panels. All parts printed in ABS and/or ASA. Please see: -below for a full list of the parts included -photos for the color combination (gold base, black accent)
-
Out of stock
Voron TRIDENT 3D printer parts kit produced by LDO. Please select your preferred color frame. 3D Printed parts, assembly, hotend and Raspberry Pi are not included -
Out of stock
Voron TRIDENT 3D printer parts kit produced by LDO. Please select your preferred color frame. 3D Printed parts, assembly, hotend and Raspberry Pi are not included
-
Out of stock
Voron TRIDENT 3D printer parts kit produced by LDO. Please select your preferred color frame. 3D Printed parts, assembly, hotend and Raspberry Pi are not included
-
MR84 ball bearing 10 pack:- Inner diameter: 4mm
- Outer diameter: 8mm
- Width: 3mm
- Bearings enclosed with dual metal shields
-
MR84 ball bearing 10 pack:
- Inner diameter: 4mm
- Outer diameter: 8mm
- Width: 3mm
- Bearings enclosed with dual metal shields
- Quantity: 10 pieces
-
Raspberry Pi display cable and ideal for tight spaces. Flexible flat cable (ffc) Length: 1000mm Please see below for more details and technical specifications. -
Out of stock
- Cut for the Voron 2.4
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
- Cut for the Voron 1.8
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm
-
Out of stock
Vision Miner's Nano Polymer Adhesive is the most effective 3D printing glue on the market.- Works with any print surface
- Compatible with virtually all filaments
- Single application lasts from several to many consecutive prints
- Sample size available
Get Social