- Precision cnc machined drive gears for use with 1.75mm filament
- Surface hardened steel
- Sharpened gear teeth to maintain maximum filament grip
- Extremeley wear resistant to withstand even the most abrasive 3D printing filaments.
-
-
The Voron Tap upgrade is the latest release from the Voron Design team featuring:- physical nozzle probing
- drop in upgrade to existing Voron 2 and Trident 3D printers (mgn12 x-rail required)
- significantly more accurate than previous spec inductive sensors
-
Smooth PEI film coated spring steel flex plate. Please see below for more information. Select your desired size: -
Engineer DR-06 features:- L-shaped metallic handle with a low-profile head, ideal for work in a confined area
- Built-in ratchet mechanism increases work productivity
- With a quick ratchet dial operated with a thumb for easy spinning
- DR-06 with a 10-in-1 bit set in a bullet holder Phillips: #00, #1 & #2 Slotted: 4.5 & 6 mm Hex: 1.5, 2, 2.5, 3 & 4 Bit set is separately available: Item No. DR-11
- Made in Japan
-
Nevermore Carbon - Premium activated carbon specifically chosen for the Nevermore range of activated carbon filters, now in XL size! The Nevermore project and it's range of 3d printable filters can be found here: https://github.com/nevermore3d -
-
Sale!
Excellent series 9 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Sale!Out of stock
350mm Linear Rail and Carriage - MGN12H 440C SUS by Fermio
- Linear guide rail length: 350mm
- Linear guide block type: Long
- Linear guide rail width: 12mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 2 - 300 spec
- Voron Trident - 300 spec
-
Out of stock
Bare spring steel flex plate for use with alternative print surfaces or specialty materials. Please see below for more information. -
Out of stock
Voron 0 clear polycarbonate panel set - 3mm thickness. Includes:- front panel
- side panels
- top hat side panels
- top hat top panel
*Handle not included!
-
LRS-200-24 is a 200W, 24V single-output, enclosed type power supply with 30mm low profile design. 115VAC or 230VAC input (select by switch). The LRS series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
-
Out of stock
The Engineer PA-06 Ultra high quality and high precision wire stripping tool.- made of carbon steel alloy for long tool life and durability
- suitable for both solid and stranded wires
- coiled return spring for smooth clamp action and release
- easy tension setting and maintenance with a single joint screw
- oil resistant elastomer (TPR) handle
- Made in Japan
-
High quality magnetic sheet to be paired with removable flex plate systems in 3D printers. Perfect for sustained high temperature 3D printing. Made in Germany by Schallenkammer. See below for further information and technical specifications. -
Out of stock
- Precision cnc machined drive gears for use with 1.75mm filament
- Surface hardened steel
- Sharpened gear teeth to maintain maximum filament grip
- Extremeley wear resistant to withstand even the most abrasive 3D printing filaments.
-
HIWIN X Rail for Voron0 - MGN7H 150mm Z1 Preload- Linear guide rail length: 150mm
- Linear guide block type: Long/Standard
- Linear guide rail width: 7mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 0 / 0.1 / 0.2
- Preload: Z1
- SKU: MGN7H1R150Z1CM
-
Black PEI powdercoated spring steel flex plate. Please see below for more information. Select your desired size: -
Black PEI film coated spring steel flex plate. Please see below for more information. Select your desired size: -
Sale!
Excellent series 9 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Sale!Out of stock
- Linear guide rail length: 400mm
- Linear guide block type: Long
- Linear guide rail width: 12mm
- Material: 440c SUS Stainless Steel
- Functional grease / lubrication port
- Suitable for:
- Voron 2 - 350 spec
- Voron Trident - 350 spec
-
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Excellent series 9 piece hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- Long end of wrench can be used at upto 25 degree angle
- Wrenches with silkscreened printing of wrench sizes for easy identification. (for wrenches 2.5-6mm)
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Out of stock
The IWISS 3220M features:- Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG
- Typical parallel crimping type ensures stability and power equalityand improves 30% of the crimping-tightness
- Double-layerWire Electrical discharge machining(EDM) Cutting jaw crimpsconductor and insulation sheath simultaneously-Only one time crimp needed
- Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR
- Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc
-
Smooth PEI film coated spring steel flex plate. Please see below for more information. Select your desired size:
-
Out of stock
Doubled sided, PEI powdercoated spring steel flex plate. Please see below for more information. Select your desired size:
Get Social