-
Sale!
Voron Trident kit - 3D printer parts kit for the 250x250x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
-
-
Sale!
Excellent series 9 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
Sale!
Excellent series 7 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
-
M3x12mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M5x10mm Button Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M5x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x20mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x16mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x30mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
Fastener kit for the Voron 1.8 3D printer. All bolts manufactured from Grade A2, 304 Stainless Steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
LRS-200-48 is a 200W, 48V single-output, enclosed type power supply with 30mm low profile design. 115VAC or 230VAC input (select by switch). The LRS series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
-
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
115 ball bearing 10 pack:- Inner diameter: 5mm
- Outer diameter: 11mm
- Width: 4mm
- Heat resistant PTFE rubber seals
- Quantity: 10 pieces
-
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
Out of stock
ABS panels Voron Trident:- Laser cut for Voron Trident
- Available: 250mm / 300mm / 350mm
- 3mm thick
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Hardened Steel hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Raven RP59 is a self adhesive EPDM rubber well helps in keeping the heat and vibrational noise inside the printer chamber. Includes 5m total length at a 9mm width. Available in White, Grey and Brown Please see below for further information. -
Nickel plated copper hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Ultra high flow nozzles manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends:- Dragon
- V6
- Mosquito
-
Complete Voron 0 frame kit with upgraded Kirigami bed mounting assembly. Anodized and sandblasted in Black / Red / Blue / Space Grey colors. Please see below for more information and technical specifications. Please choose your desired color frame. -
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
High temp silicone sock suitable for the Phaetus range of Rapido hotends. Available for high flow and ultra high flow models heatblock. -
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech for hotend with Volcano style heatblocks. Designed for 1.75mm filament and compatible with 2.85mm filament. Please see below for further information and technical specifications. -
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech for hotend with Volcano style heatblocks. Designed for 1.75mm filament and compatible with 2.85mm filament. Please see below for further information and technical specifications.
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social