-
M3 Brass Heatset Insert M3 Thread Diameter 5mm Outer Diameter 4mm Length -
Misumi HNTAJ5-3 M3 post assembly insertion nut for use with 5mm slot extrusion profile. See below for further information and technical specifications. -
Micro-Fit 3.0 43030 Series- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
Micro-Fit 3.0 43031 Series- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
Misumi HNTAJ5-5 M5 post assembly insertion nut for use with 5mm slot extrusion profile. See below for further information and technical specifications. -
The XH series Socket Contact with crimp termination.- 1.3 to 1.9mm Insulation outer diameter
- Used with JST XH Series housings
- Suitable for: 22-28AWG wire
- Material: phosphor bronze with tin-plated finish
-
General purpose switch Hinge lever actuator Rated Voltage: 250VAC / 5A Operating Temperature: Upto 85c See data sheet for further information. -
Premium activated carbon specifically chosen for the Nevermore range of activated carbon filters. The Nevermore project and it's range of 3d printable filters can be found here: https://github.com/nevermore3d -
Sale!
Genuine LL-2GT-6 gates synchronous belt for 2GT/GT2 pulleys. Belt width: 6mm Tooth Pitch: 2mm To be paired with 2GT pulleys and idlers. Price is per 1M of belt length and is shipped as 1 piece x amount of metres purchased. -
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 2
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 2
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
-
- 60watt allows for much faster hotend heating
- Length: 20mm
- Width: 6mm
- Wire length: 100cm
- Compatible with:
- E3D style heatblock
- Mosquito heatblock
- Dragon heatblock
-
Avikrimp Spade Tongue Terminal- Suitable for: 18-22 AWG Wire
- Insulation material: Nylon
- Tin Plated
-
M3x12mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish -
-
-
Sale!
Genuine gates synchronous belt for 2GT/GT2 pulleys. Belt width: 9mm Tooth Pitch: 2mm To be paired with 9mm 2GT pulleys and idlers. Price is per 1M of belt length and is shipped as 1 piece x amount of metres purchased. -
- 5 way terminal block for a tool-less connection
- Easily terminate conductors from 0.14 to 4 mm² / 24awg - 12awg
- Refer to photos for dimensions and usage diagrams
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 4
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Out of stock
Spherical bearings for the Voron Trident and GE5C mods on the Voron 2.Discontinued in Stock Item
Similar Item: GE5C Spherical Bearing Please see below for further information and technical details. -
- Suitable for 3D printing temperatures of upto 280c.
- Silicone wire sheath
- 100cm wire length
- Preterminated with JST terminal pins
- Suitable for 3D printing temperatures of upto 280c.
-
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social