-
The Dragon hotend sock is a high temp silicone sock suitable for the Phaetus range of Dragon hotends. Fits both the standard and high flow model heatblocks. Available in Black or Orange. -
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Out of stock
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Brass hotend nozzle suitable for 1.75mm filament. Compatible with:
- Phaetus / TL Dragon
- Slice Mosquito
- E3D V6 and others
-
Rocker Switch by ZF Electronics- On/Off operation
- DPST Circuit
- Snap in panel mounting
- Operating Temperature: Upto 65c
- Rated Voltage: 125v / 16A (AC)
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 16 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-6-P5-C-H15.5
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA20-2GT-6-P5-C-H16
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
General purpose switch Hinge lever actuator Rated Voltage: 250VAC / 5A Operating Temperature: Upto 85c See data sheet for further information. -
Out of stock
M3 Hex Nut Zinc Plated Quantity: 100 pieces -
Out of stock
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black Anodised finish
- 6061 Aluminium
- SKU: RLA20-2GT-6-P5-C-H16
-
Synchronous belt toothed idler suitable for Gates PowerGrip® 6mm wide 2gt belts.- 20 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- Double flanged
- 6061 Aluminium
- SKU: P20-2GT-6-A-P5-H10
-
Synchronous belt pulley suitable for Gates POWERGRIP® 6mm wide 2gt belts.- 16 tooth
- Tooth width: 7mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: RLA16-2GT-6-P5-C-H15.5
-
Synchronous belt smooth idler suitable for 6mm wide 2gt belts.- 7mm width
- 5mm inner bore diameter
- Double flanged
- 6061 Aluminium
- SKU: D12-6-A-P5-H10
-
Synchronous belt pulley suitable for Gates POWERGRIP® 9mm wide 2gt belts.- 16 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M2 set screws (included)
- Double flanged
- Black anodised finish
- 6061 Aluminium
- SKU: RLA16-2GT-10-C-P5-H18
-
High temp silicone sock suitable for the Phaetus range of Rapido hotends. Available for high flow and ultra high flow models heatblock. -
Rapido 2 sock is a high temp silicone sock suitable for the Phaetus range of Rapido 2 hotends. Available for high flow and ultra high flow models heatblock.
-
- Suitable for 3D printing temperatures of upto 280c.
- Silicone wire sheath
- 100cm wire length
- Preterminated with JST terminal pins
- Suitable for 3D printing temperatures of upto 280c.
-
Out of stock
Synchronous belt pulley suitable for Gates POWERGRIP® 2gt belts up to 10mm wide.- 20 tooth
- Tooth width: 11mm
- 2mm pitch
- 5mm inner bore diameter
- 2x M4 set screws (included)
- Double flanged
- 6061 Aluminium
- SKU: RLA20-2GT-10-P5-C-H20
-
High temp silicone sock suitable for the Phaetus range of Rapido hotends. Available for high flow and ultra high flow models heatblock.
-
Rapido 2 sock is a high temp silicone sock suitable for the Phaetus range of Rapido 2 hotends. Available for high flow and ultra high flow models heatblock.
-
Sale!Out of stock
Excellent series 1.5mm hexagon screwdriver.- Taper head on long end of driver for effective pre-fastening and final tightening
- Long shaft and compact handle for workability in deep or narrow places
- High quality acetate plastic handle is resistant to both oil and chemicals, is extremely durable, and prevents slippage and damage from impact while being easy on the hands.
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below Disclaimer: All information is kept secure and will not be shared or sold to any third party. Read our Privacy Policy
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social