- Cut for the Voron Trident
- Clear Polycarbonate
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
-
-
115 ball bearing 10 pack:- Inner diameter: 5mm
- Outer diameter: 11mm
- Width: 4mm
- Heat resistant PTFE rubber seals
- Quantity: 10 pieces
-
UniqueASA filament is a high quality, high performance ASA made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- UV resistant and suitable for use in and outdoors including direct sunlight
-
LRS-200-48 is a 200W, 48V single-output, enclosed type power supply with 30mm low profile design. 115VAC or 230VAC input (select by switch). The LRS series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
-
Fastener kit for the Voron 1.8 3D printer. All bolts manufactured from Grade A2, 304 Stainless Steel. Packaged in a 20 compartment rigid plastic organiser. Please read below for more detailed information on kit contents. -
M5x30mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x16mm Button Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M3x20mm Socket Head Cap Screw High Tensile Alloy Steel Black oxide finish Quantity: 100 pieces -
M5x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M5x10mm Button Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x40mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
M3x12mm Socket Head Cap Screw Class A2 / 304 Stainless steel Quantity: 100 pieces -
Sale!
Excellent series 7 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
-
Sale!
Excellent series 9 piece stubby hexagon wrench set.- Taper head on long end of wrench for effective pre-fastening and final tightening
- The stubby short arm length is designed to be half as short as other wrenches to allow easy access and work in cramped spaces
- The stubby short arm is made with a 95 degree bend for high workability in cramped spaces without the risk of pinched fingers
- Long end of wrench can be used at up to 25 degree angle
- 1.5mm
- 2mm
- 2.5mm
- 3mm
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
-
-
-
Out of stock
Bondtech CHT BiMetal nozzles are ultra high flow nozzles with an abrasive resistant vanadium steel core for high flow applications with abrasive materials. Manufactured in house by Bondtech. Designed for 1.75mm filament and compatible with 2.85mm filament. Compatible with the following hotends as well as any other hotend accepting an M6 nozzle:- Dragon
- V6
- Mosquito
-
Engineer DR-04 is a stubby ratchet driver and bit set.- Compact 95mm body in length with a grip which fits in the palm
- Ratchet handle with a sliding mode switch, Fasten, Fix & Unfasten
- With a knurled chuck cover for quick ratchet spinning
- DR-04 with 10-in-1 bit set in a bullet style holder Phillips : #00, #1 & #2 Slotted : 4.5 & 6 mm Ball-headed Hex : 2.5, 3.0, 4.0, 5.0 & 6.0 mm Bit set is separately available : Item No. DR-10
- Made in Japan
-
Sale!
Voron Trident kit - 3D printer parts kit for the 250x250x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included. -
Sale!
Voron Trident kit - 3D printer parts kit for the 300x300x250 size. Raspberry Pi, printed parts, hotend and assembly are NOT included.
-
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details. -
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details.
-
Out of stock
Voron 0.2 S1 3D printer parts kit produced by LDO. Featuring the latest Voron 0.2 revision along with E3D Revo hotend and numerous LDO developed upgrades and extras. Please select your preferred color frame. 3D Printed parts, assembly and Raspberry PI are not included. This is a pre-order item, please see below for more details.
-
The Voron Trident Linear Rail Kit is a complete set of high quality stainless steel linear rails and carriages for the Voron Trident 3D printer. Purchase includes:- 5x MGN9H rails
- 1x MGN12H rail
Get Social