-
Out of stock
Omron’s G3NA-210B-UTU-DC5-24 unit is a solid-state AC output relay with a maximum output of 264V/10A. The G3NA-210B-DC5-24 is UL certified, CSA certified, and RoHS-compliant. The G3NA-210B-UTU-DC5-24 is rated for input voltages of 5V to 24V, while a built-in varistor absorbs external surges and an operation indicator allows monitoring operation. See Technical Datasheet for further information. -
Avikrimp Spade Tongue Terminal- Suitable for: 18-22 AWG Wire
- Insulation material: Nylon
- Tin Plated
-
"Ultra-Fast FASTON" fully Insulated receptacles by TE Connectivity.- Housing Material: Nylon 6/6
- Contact Material: Tin plated, copper alloy
- Suitable for 18-22 AWG wire
- Operating termperature: Upto 105c
- Tab size: 6.35mm
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 4
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 3
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 2
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 2
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 3
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing- Single Row
- Circuits: 4
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Micro-Fit 3.0 43030 Series- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
Micro-Fit 3.0 43031 Series- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
The XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 2
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
-
The XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 3
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
-
The XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.- Number of positions: 4
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
-
The XH series Socket Contact with crimp termination.- 1.3 to 1.9mm Insulation outer diameter
- Used with JST XH Series housings
- Suitable for: 22-28AWG wire
- Material: phosphor bronze with tin-plated finish
-
Filtered Power Entry Module by TE Connectivity- Power entry module with enhanced EMI filter
- Rated Current: 10A
- Rated Voltage: 250VAC
- Operating Frequency: 50/60 Hz
- Dual 5x20mm Glass cartridge fuses (not included)
- Low current leakage (<0.5 mA)
-
Rocker Switch by ZF Electronics- On/Off operation
- DPST Circuit
- Snap in panel mounting
- Operating Temperature: Upto 65c
- Rated Voltage: 125v / 16A (AC)
-
Vibration absorbing hard rubber 3D printer feet.- Material: EPDM
- Width: 36mm
- Depth: 17mm
- Load: 15kg
-
Wago 2102-5201 2 Conductor Through Terminal Block features:- Lever actuation
- Push button actuation
- 22-12 AWG conductor size
- Rated Voltage: 600V / 20A
- Multimeter continuity access holes
- 35mm Din rail mountable
-
General purpose switch Hinge lever actuator Rated Voltage: 250VAC / 5A Operating Temperature: Upto 85c See data sheet for further information. -
Cable Tie 98mm x 2.5mm (100 Pack)- Multi-purpose cable tie for many applications
- UV Resistant - Good for outdoor installations
-
Cable Tie 98mm x 2.5mm (100 Pack)- Multi-purpose cable tie for many applications
- UV Resistant - Good for outdoor installations
-
Angled DIN-rail adapter for Wago mounting carrier allows for horizontal mounting orientation of the 221-500 carrier to DIN 35 rail.- Snap fit assembly to mounting carrier
- Snap fit mounting to 35mm DIN rail
-
Out of stock
- Mounting carrier for 2/3/5 way 221 series Wago terminal blocks
- 35mm Din rail mount
- Screw mount
FREE Upgrade to Express Shipping for Australian orders over $150
Australia’s 1st & Leading VORON Vendor
"We ONLY sell parts we would use ourselves and be proud of"
Shop
Australian based. Primarily dealing with the Voron range of 3D printers and their parts.
Save up to $3 per Polymaker PolyLite Filament Roll
Exclusive Special Offers and news delivered to your inbox!
Simply enter your name and email below Disclaimer: All information is kept secure and will not be shared or sold to any third party. Read our Privacy Policy
Copyright © 2020 | Unique Prints. All Rights Reserved.
Get Social