-
Micro-Fit 3.0 43030 Series
- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
Micro-Fit 3.0 43031 Series
- Crimp Termination
- Suitable for: 20-24 AWG wire
- Tin plated contacts
-
The XH series Socket Contact with crimp termination.
- 1.3 to 1.9mm Insulation outer diameter
- Used with JST XH Series housings
- Suitable for: 22-28AWG wire
- Material: phosphor bronze with tin-plated finish
-
General purpose switch Hinge lever actuator Rated Voltage: 250VAC / 5A Operating Temperature: Upto 85c See data sheet for further information.
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 2
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 2
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Avikrimp Spade Tongue Terminal
- Suitable for: 18-22 AWG Wire
- Insulation material: Nylon
- Tin Plated
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 4
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 4
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Out of stock
- Compatible with several series of SSR used in 3D printers (Omron G3NE / G3NA, Sensata Crydom Series 1)
- For use with 35mm x 7.5mm din rails
- All metal construction for additional heat dissipation
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 3
- Series: 43640
- Operating temperature: upto 105c
- Power
- Wire-to-wire
-
Micro-Fit 3.0 Receptacle Housing
- Single Row
- Circuits: 3
- Series: 43645
- Operating temperature: upto 105c
- Power
- Wire-to-Board
- Wire-to-wire
-
Active thermal fuse to provide additional safety for your machine. Used as a failsafe against malfunction in heat producing elements to prevent the temperature from rising to dangerous levels and possibly starting a fire. e.g: a faulty thermistor incorrectly reading temperature and signaling the heat producing element to continue heating past target temperature. Made in Germany by Alpha Therm.
-
"Ultra-Fast FASTON" fully Insulated receptacles by TE Connectivity.
- Housing Material: Nylon 6/6
- Contact Material: Tin plated, copper alloy
- Suitable for 18-22 AWG wire
- Operating termperature: Upto 105c
- Tab size: 6.35mm
-
The XH series housing from JST are 2.5mm pitch, single row housing, disconnectable crimp style connectors.
- Number of positions: 2
- Pitch spacing: 2.5mm
- Operating Temperature: Upto 85c
-
Out of stock
- 2 way terminal block for a tool-less connection
- Easily terminate conductors from 0.14 to 4 mm² / 24awg - 12awg
- Refer to photos for dimensions and usage diagrams
-
-
-
-
Out of stockHigh performance 5015 blower fan manufactured by Delta Electronics.
- 24v
- Ball bearing
- 6500rpm
- 4.6 cfm
- 0.866 in H2O static pressure.
-
-
KUSBA is an all in one accelerometer solution to measure resonances for your 3D printer. With an integrated RP2040 mcu and onboard ADXL345 diy wiring and soldering is no longer required - just a USB-C to USB-A cable (included) Designed by xbst / Isik's Tech - every purchase directly supports his efforts for further research and development into this and other projects. Please see below for further information.
-
Out of stock
- Item Type: Stepper Motor Driver
- Current: 2.0
- Motor Voltage: 5.5...28V
- Logic Voltage: 3.3...5V
- Coil Current: 2.8A Peak
- Interface: Step/DIR/UART
- Extra Function: CoolStep and stallGuard
Electrical 3D printer components. Including but not limited to, wiring, connectors, electronics, wire management. sensors.
Get Social