UniqueABS Filament – Pink 1kg – 1.75mm
$33.50 AUD inc GST
Out of stock
UniqueABS filament is a high quality, high performance ABS made to exceptional standards to provide excellent consistency, printability and surface finishes print after print.
- Excellent mechanical properties
- High thermal resistance for a wide range of operating conditions
- Suitable for use in and outdoors
Please see below for more information and technical specifications.
Out of stock
Notify when stock available
Description
UniqueABS filament will produce high quality, high performance parts with an excellent finish time after time. Perfect for both indoor and outdoor use, aswell as automotive applications while being more affordable than UniqueASA.
UniqueABS makes for dimensionally accurate, lightweight and strong parts. ABS is especially suitable for applications where a more capable filament is required, with properties that regular filaments cannot offer.
Our abs is an excellent choice for everything from decorative prints to highly durable end use production parts required for high performance machines and 3d printers from Voron Design / VZbot and more.
Printed parts for 3D printer component applications especially, benefit from the material properties ABS offers. Where other commonly used filaments such as PLA and PETG would fail, either through deformation at elevated chamber temperatures or through the rigorous mechanical stresses that occur during operation. ABS stays dimensionally stable at a wide range of operating temperatures and has excellent impact resistance as well.
UniqueABS will perform at it’s peak when printed in a warm environment, we strongly recommended to use with a fully enclosed machine. The print settings below assume an enclosure is present at a minimum.
UniqueABS features:
- Water Resistant
- Excellent Printing Quality
- No Compromise Production Quality
Thermal Properties
- Glass Transition Temperature: 101.1˚C
- Heat Deflection Temperature (0.45 MPa): 99.6˚C
- Heat Deflection Temperature (1.8 MPa): 98.2˚C
- Vicat Softening Temperature: 103.9˚C
Print Settings – Factory recommended:
- Nozzle Temperature: 245˚C – 265˚C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 90˚C – 100˚C
- Bed Surface: BuildTak, PEI
- Cooling Fan: OFF
Print Settings – High performance:
- Nozzle Temperature: 245˚C – 265˚C
- Printing Speed: 150mm/s – 250mm/s
- Bed Temperature: 100˚C – 110˚C
- Bed Surface: PEI
- Cooling Fan: Toolhead and print speed dependant – approx 30-50%
Please see our published filament print profiles here used on our machines at UniquePrints for more in depth detail (coming soon).
Notes
- Density: 1.12 g/cm3
Storage: It is recommended to store UniqueABS in a humidity controlled enclosure to prevent moisture absorption which will affect and lower both the quality and the mechanical properties of printed parts. If the filament has absorbed moisture it can be dried at 70˚C for 6 hours in a convection oven or equivalent filament drier.
We use and recommend Eibos filament driers.
Additional information
Weight | 1.3 kg |
---|---|
Dimensions | 22 × 21 × 7 cm |
Filament Type | ABS |
Colours | Pink |
Size | 1kg |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.