Voron Part Selector
V2.4 Printed Parts – Functional Parts Set – All Black – Dragon – SKR 1.3 / 1.4
$219.45 AUD inc GST
Out of stock
Included in this listing is a functional set of parts for the latest release of the Voron 2.4.
Includes all functional parts and your choice of toolhead and control board bracket parts.
All parts printed in ABS and/or ASA.
Please see:
-below for a full list of the parts included
-photos for the color combination (All Black)
Please advise of the hotend and control boards that you will be using for the relevant parts to be included in your parts kit:
View Other Variations
Out of stock
Notify when stock available
Description
Functional parts
Clips:
- a]_z_belt_clip_lower_x4.stl
- [a]_z_belt_clip_upper_x4.stl
AB Drive Units:
- a_drive_frame_lower.stl
- a_drive_frame_upper.stl
- b_drive_frame_lower.stl
- b_drive_frame_upper.stl
- [a]_z_chain_retainer_bracket_x2.stl
- [a]_cable_cover.stl
Front Idlers:
- front_idler_left_lower.stl
- front_idler_left_upper.stl
- front_idler_right_lower.stl
- front_idler_right_upper.stl
- [a]_tensioner_left.stl
- [a]_tensioner_right.stl
X-Carriage:
- blower_housing_rear.stl
- hotend_fan_mount.stl
- probe_retainer_bracket.stl
- x_carriage_frame_left.stl
- x_carriage_frame_right.stl
- x_carriage_pivot_block.stl
- [a]_belt_clamp_x2.stl
- [a]_blower_housing_front.stl
Z-Joints:
- z_joint_lower_x4.stl
- z_joint_upper_x4.stl
- z_joint_upper_hall_effect.stl
Toolhead:
- printhead_front_v6.stl
- printhead_rear_v6.stl
- chain_anchor.stl
- chain_anchor_10x11chains.stl
- extruder_body.stl
- extruder_motor_plate.stl
- latch_shuttle.stl
- [a]_connector_cover.stl
- [a]_guidler.stl
- [a]_latch.stl
XY-Joints:
- xy_joint_left_lower.stl
- xy_joint_left_upper.stl
- xy_joint_right_lower.stl
- xy_joint_right_upper.stl
- [a]_endstop_pod_hall_effect.stl
- [a]_endstop_pod_microswitch.stl
- [a]_xy_joint_cable_bridge_generic.stl
- [a]_xy_joint_cable_bridge_igus.stl
Z-Drive:
- z_drive_main_a_x2.stl
- z_drive_main_b_x2.stl
- z_drive_retainer_a_x2.stl
- z_drive_retainer_b_x2.stl
- z_motor_mount_a_x2.stl
- z_motor_mount_b_x2.stl
- z_chain_bottom_anchor.stl
- z_chain_guide.stl
- [a]_belt_tensioner_a_x2.stl
- [a]_belt_tensioner_b_x2.stl
- [a]_z_drive_baseplate_a_x2.stl
- [a]_z_drive_baseplate_b_x2.stl
Z-Idlers:
- z_tensioner_bracket_a_x2.stl
- z_tensioner_bracket_b_x2.stl
- [a]_z_tensioner_x4_9mm.stl
Miscellaneous:
- nozzle_probe.stl
- rail_installation_guide_center_x2.stl
- bowen_retainer.stl
- spool_holder.stl
Electronics Mounting:
- plug_panel_filtered_mains.stl
DIN Brackets:
- lrs_psu_bracket_clip.stl
- raspberrypi_bracket.stl
- rs25_psu_bracket_clip.stl
- pcb_din_clip_x3.stl
Selection for Hotend parts:
- E3D V6
- Slice Mosquito
- Triangle Labs dragon
Selection for MCU brackets:
- Duet Duex
- BTT SKR 1.3 / 1.4
- BTT Octopus
- Fysetc Spider
Additional information
| Weight | 1.08 kg |
|---|---|
| Hotend | Dragon, Slice Mosquito, E3D V6 |
| MCU | SKR 1.3 / 1.4, Fysetc Spider, BTT Octopus |
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related products
V2.4 Printed Parts – Functional Parts Set – Gold and Black – Dragon – SKR 1.3 / 1.4
$219.45 AUD inc GST
Out of stock
Included in this listing is a functional set of parts for the latest release of the Voron 2.4.
Includes all functional parts and your choice of toolhead and control board bracket parts.
All parts printed in ABS and/or ASA.
Please see:
-below for a full list of the parts included
-photos for the color combination (gold base, black accent)
Please advise of the hotend and control boards that you will be using for the relevant parts to be included in your parts kit:
Out of stock
Notify when stock available
Description
Functional parts
Clips:
- a]_z_belt_clip_lower_x4.stl
- [a]_z_belt_clip_upper_x4.stl
AB Drive Units:
- a_drive_frame_lower.stl
- a_drive_frame_upper.stl
- b_drive_frame_lower.stl
- b_drive_frame_upper.stl
- [a]_z_chain_retainer_bracket_x2.stl
- [a]_cable_cover.stl
Front Idlers:
- front_idler_left_lower.stl
- front_idler_left_upper.stl
- front_idler_right_lower.stl
- front_idler_right_upper.stl
- [a]_tensioner_left.stl
- [a]_tensioner_right.stl
X-Carriage:
- blower_housing_rear.stl
- hotend_fan_mount.stl
- probe_retainer_bracket.stl
- x_carriage_frame_left.stl
- x_carriage_frame_right.stl
- x_carriage_pivot_block.stl
- [a]_belt_clamp_x2.stl
- [a]_blower_housing_front.stl
Z-Joints:
- z_joint_lower_x4.stl
- z_joint_upper_x4.stl
- z_joint_upper_hall_effect.stl
Toolhead:
- printhead_front_v6.stl
- printhead_rear_v6.stl
- chain_anchor.stl
- chain_anchor_10x11chains.stl
- extruder_body.stl
- extruder_motor_plate.stl
- latch_shuttle.stl
- [a]_connector_cover.stl
- [a]_guidler.stl
- [a]_latch.stl
XY-Joints:
- xy_joint_left_lower.stl
- xy_joint_left_upper.stl
- xy_joint_right_lower.stl
- xy_joint_right_upper.stl
- [a]_endstop_pod_hall_effect.stl
- [a]_endstop_pod_microswitch.stl
- [a]_xy_joint_cable_bridge_generic.stl
- [a]_xy_joint_cable_bridge_igus.stl
Z-Drive:
- z_drive_main_a_x2.stl
- z_drive_main_b_x2.stl
- z_drive_retainer_a_x2.stl
- z_drive_retainer_b_x2.stl
- z_motor_mount_a_x2.stl
- z_motor_mount_b_x2.stl
- z_chain_bottom_anchor.stl
- z_chain_guide.stl
- [a]_belt_tensioner_a_x2.stl
- [a]_belt_tensioner_b_x2.stl
- [a]_z_drive_baseplate_a_x2.stl
- [a]_z_drive_baseplate_b_x2.stl
Z-Idlers:
- z_tensioner_bracket_a_x2.stl
- z_tensioner_bracket_b_x2.stl
- [a]_z_tensioner_x4_9mm.stl
Miscellaneous:
- nozzle_probe.stl
- rail_installation_guide_center_x2.stl
- bowen_retainer.stl
- spool_holder.stl
Electronics Mounting:
- plug_panel_filtered_mains.stl
DIN Brackets:
- lrs_psu_bracket_clip.stl
- raspberrypi_bracket.stl
- rs25_psu_bracket_clip.stl
- pcb_din_clip_x3.stl
Selection for Hotend parts:
- E3D V6
- Slice Mosquito
- Triangle Labs dragon
Selection for MCU brackets:
- Duet Duex
- BTT SKR 1.3 / 1.4
- BTT Octopus
- Fysetc Spider
Additional information
| Weight | 1.08 kg |
|---|---|
| Hotend | Dragon, Slice Mosquito, E3D V6 |
| MCU | SKR 1.3 / 1.4, Fysetc Spider, BTT Octopus |
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related products
Voron 2.4 Fastener Kit CL12.9
From: $186.45 AUD inc GST
In stock
Voron 2.4 Fastener Kit.
All bolts manufactured from high tensile alloy steel.
Packaged in a 20 compartment rigid plastic organiser.
Please read below for more detailed information on kit contents.
Description
Fastener kit for the Voron 2.4 3D printer.
All bolts manufactured from high tensile alloy steel.
Class 12.9 with Black Oxide Finish
Nuts and washers are Class 8 with zinc plating
What you get in the kit:
| Item | Required: | Included: |
| M5x40 SHCS | 22 | 25 |
| M5x30 BHCS | 22 | 25 |
| M5x16 BHCS | 27 | 37 |
| M5x10 BHCS | 40 | 55 |
| M5 Hexnut | 26 | 40 |
| M5 1mm Spacer | 42 | 50 |
| M4x6 BHCS | 4 | 6 |
| M4 Knurled Nut | 4 | 4 |
| M3x8 SHCS | 217 | 235 |
| M3x6 BHCS | 6 | 8 |
| M3x40 SHCS | 28 | 35 |
| M3x30 SHCS | 25 | 30 |
| M3x20 SHCS | 29 | 30 |
| M3x16 SHCS | 14 | 25 |
| M3x12 SHCS | 23 | 30 |
| M3 Washer | 2 | 12 |
| M3 Threaded Insert | 90 | 95 |
| M3 Hexnut | 7 | 20 |
| M2x10 Self Tapping screws | 10 | 20 |
| M3 T-nuts (hammerhead) | 47 | 50 |
| 6x3mm Round Magnets | 8 | 12 |
What’s NOT included in the kit:
M5 T-nuts
M3 T-nuts
All component quantities are taken from the Voron Design configurator. As development is ongoing please be sure to compare all item quantities here first:
http://vorondesign.com/voron2.4
Kit contents upto date as of 22/5/2020.
Additional information
| Weight | 1.66 kg |
|---|
1 review for Voron 2.4 Fastener Kit CL12.9
Only logged in customers who have purchased this product may leave a review.
Related products
Voron 2.4 Fastener Kit SS304
From: $169.95 AUD inc GST
In stock
Voron 2.4 Fastener Kit.
All bolts manufactured from Grade A2, 304 Stainless Steel.
Packaged in a 20 compartment rigid plastic organiser.
Please read below for more detailed information on kit contents.
Description
Voron 2.4 Fastener Kit.
All bolts manufactured from Grade A2, 304 Stainless Steel.
Nuts and washers are Class 8 with zinc plating
What you get in the kit:
| Item | Required: | Included: |
| M5x40 SHCS | 22 | 25 |
| M5x30 BHCS | 22 | 25 |
| M5x16 BHCS | 27 | 37 |
| M5x10 BHCS | 40 | 55 |
| M5 Hexnut | 26 | 40 |
| M5 1mm Spacer | 42 | 50 |
| M4x6 BHCS | 4 | 6 |
| M4 Knurled Nut | 4 | 4 |
| M3x8 SHCS | 217 | 235 |
| M3x6 BHCS | 6 | 8 |
| M3x40 SHCS | 28 | 35 |
| M3x30 SHCS | 25 | 30 |
| M3x20 SHCS | 29 | 30 |
| M3x16 SHCS | 14 | 25 |
| M3x12 SHCS | 23 | 30 |
| M3 Washer | 2 | 12 |
| M3 Threaded Insert | 90 | 95 |
| M3 Hexnut | 7 | 20 |
| M2x10 Self Tapping screws | 10 | 20 |
| M3 T-nuts (hammerhead) | 47 | 50 |
| 6x3mm Round Magnets | 8 | 12 |
What’s NOT included in the kit:
M5 T-nuts
M3 T-nuts
All component quantities are taken from the Voron Design configurator. As development is ongoing please be sure to compare all item quantities here first:
http://vorondesign.com/voron2.4
Kit contents upto date as of 22/5/2020.
Additional information
| Weight | 1.66 kg |
|---|
1 review for Voron 2.4 Fastener Kit SS304
-
I got this as a “top-up” of all my spare screws/bits after building a few printers. The quality of all the fixings are excellent, the tub is isn’t one of those cheap ones that crack the second you look at them and the labeling on the inside of the tub is clear and obvious.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
Voron 2 Motion Kit
$318.45 AUD inc GST
Only 1 left in stock
Voron 2 motion kit includes:
All required belts, pulleys, idlers, bearings and shafts.
Please see below for more detailed kit contents.
Only 1 left in stock
Description
Kit includes:
| Gates LL-2GT-RF 6mm Belt | 5m |
| Gates LL-2GT-RF 9mm Belt | 5m |
| Gates 188-2GT-RF 188mm Belt loop | 4 |
| Gates GT2 20T Pulley for 6mm belt | 3 |
| Gates GT2 20T Pulley for 9mm belt | 4 |
| Gates GT2 16T Pulley for 6mm belt | 4 |
| Gates GT2 20T Idler for 6mm belt | 2 |
| Gates GT2 20T Idler for 9mm belt | 4 |
| Gates GT2 80T Pulley for 6mm belt | 4 |
| Misumi 60mm, 5mm shaft (ground) | 4 |
| Misumi 30mm, 5mm shaft | 1 |
| MF695-2RS Bearing | 22 |
| MR625-2RS Bearing | 12 |
Additional information
| Weight | 0.666 kg |
|---|
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related products
Coming Soon
Rubber Feet for Voron V1/V2 Olive
$21.45 AUD inc GST
In stock
Vibration absorbing hard rubber 3D printer feet.
- Material: EPDM
- Width: 36mm
- Depth: 17mm
- Load: 15kg
Secure with M5 or M6 x 16mm BHCS.
Suitable for Voron Trident and 2.4.
Purchase includes 4 Rubber feet.
See product images for additional dimensions.
View Other Variations
In stock
Description
Vibration absorbing hard rubber 3D printer feet.
- Width: 36mm
- Depth: 17mm
- Part Number: C-30-RK-3617
- Material: EPDM
- Hardness: 65° ± 5°
- Load: 15kg (each)
- Weigh: 21grams
- Operating Temperature: upto 70c
Secure with M5 or M6 x 16mm BHCS.
Suitable for Voron Trident and 2.4.
Purchase includes 4 rubber feet.
Additional information
| Weight | 0.021 kg |
|---|---|
| Color | Black, Ivory, Olive |
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related products
Voron 2.4 Wiring & Connector Kit
From: $274.45 AUD inc GST
Out of stock
Voron 2.4 wiring and connector kit. Comes with all the required connectors required for the Voron 2.4 3D printer including numerous spare parts.
Includes genuine Microfit and JST connectors, terminal pins, Wago terminal blocks, Omron solid state relay with mount, filtered inlet, on/off rocker switch and more!
Packaged in a 20 compartment rigid plastic organiser.
Please read below for more detailed information on kit contents.
Bundle Options:
- Add 1 extra product for $10 off total price
- Add 2 extra products for $30 off total price
Notify when stock available
Description
Wiring and connector kit for Voron 2.4
Kit includes:
| Required: | Included: | |
| Omron D2F-5L | 3 | 4 |
| BAT85 Diode | 1 | 1 |
| Rocker Switch | 1 | 1 |
| Glass Fuses | 2 | 2 |
| Filtered Inlet 3-1609115-3 | 1 | 1 |
| SSR – Omron G3NA-210B-DC5 | 1 | 1 |
| SSR Din Rail Adapter | 1 | 1 |
| Fork Spade Terminal 0191980006 | 15 | 25 |
| Insulated Crimp Receptical 2-520184-2 | 10 | 20 |
| Nylon Cable Ties 4″ | 100 | 100 |
| MicroFit3 Male Pin (43031-0007) | 40 | 100 |
| MicroFit3 Female Pin (43030-0007) | 40 | 100 |
| MicroFit Connector Receptacle 4 Position (43645-0400) | 4 | 20 |
| MicroFit Connector Receptacle 3 Position (43645-0300) | 1 | 20 |
| MicroFit Connector Receptacle 2 Position (43645-0200) | 6 | 20 |
| MicroFit Connector Plug 4 Position (43640-0401) | 4 | 20 |
| MicroFit Connector Plug 3 Position (43640-0301) | 1 | 20 |
| MicroFit Connector Plug 2 Position (43640-0201) | 6 | 20 |
| JST-XH Female Pin SXH-001T-P0.6 | 40 | 100 |
| JST-XH Connector Plug 4 Position XHP-4 | 4 | 20 |
| JST-XH Connector Plug 3 Position XHP-3 | 4 | 20 |
| JST-XH Connector Plug 2 Position XHP-2 | 4 | 20 |
| Wago 221-412 | 0 | 5 |
| Wago 221-413 | 0 | 5 |
| Wago 221-415 | 0 | 5 |
| WAGO-221-500 – Mounting Carrier | 0 | 2 |
| WAGO-222-505 – Strain Relief Plate | 0 | 2 |
| WAGO-222-510 – Angled DIN Adapter | 0 | 2 |
| MLX Power Receptacle 3 Position (50-84-2030) | 1 | 1 |
| MLX Power Plug 3 Position (50-84-1030) | 1 | 1 |
| MLX Male Pin (02-08-2004) | 6 | 20 |
| MLX Female Pin (02-08-1002) | 6 | 20 |
| Thermal Fuse 115c | 1 | 1 |
All component quantities are taken from the Voron Design website configurator.
As development is ongoing please be sure to compare all item quantities here first:
http://vorondesign.com/voron2.4
Kit contents upto date as of 5/10/2020.
Additional information
| Weight | 1.03 kg |
|---|
2 reviews for Voron 2.4 Wiring & Connector Kit
-
This kit has been fantastic to have around for any connector crimps I need for my printer.
-
Honestly did not appreciate this anywhere as much as i did until i ripped a connector off and had it spare thanks to this kit. 100% got my moneys worth from this and so glad it was available.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
Coming Soon
Coming Soon
Voron 2 Full Motor Kit
$175.45 AUD inc GST
Out of stock
Includes:
2x 0.9 degree 40mm 2A motors for X and Y axis
1x 1.8 degree 20mm 1A slim pancake motor for the afterburner toolhead.
4x 1.8 degree 48mm 2A motors for each corner of the Z axis
X, Y and E motors are high temp, 180c insulation class.
Please see below for further information and technical specifications for each of the motors.
Out of stock
Notify when stock available
Description
Includes:
4x Z Motors: LDO-42STH48-2004AC(VRN)
2x AB Motors: LDO-42STH40-2004MAH
1x Extruder Motor: LDO-42STH20-1004ASH
X, Y and Extruder motors are high temp, 180c insulation class.
Specifications and technical details
Z Motors: LDO-42STH48-2004AC(VRN)
AB Motors: LDO-42STH40-2004MAH
Extruder Motor: LDO-36STH20-1004AHG(XH)
Additional information
| Weight | 4 kg |
|---|
1 review for Voron 2 Full Motor Kit
-
Swapped out my random formbot kit motors with these and they’re great, worth the purchase.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
Meanwell UHP-200-24
$109.45 AUD inc GST
In stock
UHP-200-24 is a 200W, 24V single-output, slim type enclosed power supply with 26mm low profile design. 90-264VAC input.
The UHP series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:
- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
- LED display applications
and many more.
See bellow for further information and technical specifications.
In stock
Description
Features:
- Slim and low profile design (26mm tall)
- Able to withstand 300VAC surge input for upto 5 seconds
- Short circuit / Overload / Over voltage and over temperature protections built in
- Fanless design with free air convection cooling
- Built in PFC functionality (power factor correction)
- Able to withstand upto 5g vibration
- Power on LED indicator
- Wide operating temperature range from -30c upto +70c
- High efficiency, long life and high reliability
- Backed by 3 year manufacturer warranty.
See technical datasheet for further information.
Additional information
| Weight | 0.47 kg |
|---|---|
| Dimensions | 19.4 × 5.5 × 2.6 cm |
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
Meanwell LRS-35-5
$32.45 AUD inc GST
In stock
LRS-35-5 is a 35W, 5V single-output, enclosed type power supply with 30mm low profile design. 85-264VAC input.
The LRS series of power supply from Meanwell are a verstatile range and highly certified. Fit for many applications including, but not limited to:
- Voron 3D printing machines
- industrial automation machinery
- industrial control systems
- mechanical and electrical equipment
and many more.
See bellow for further information and technical specifications.
In stock
Description
Features:
- Able to withstand 300VAC surge input for upto 5 seconds
- Short circuit / Overload / Over voltage protections built in
- Free air convection cooled
- 1U low profile and small overall size
- Able to withstand upto 5g vibration
- Power on LED indicator
- Less than 0.2W power consumption under no load
- High sustained operating temperature of upto 70c
- Over voltage category III
- High efficiency, long life and high reliability
- Backed by 3 year manufacturer warranty.
See technical datasheet for further information.
Additional information
| Weight | 0.23 kg |
|---|---|
| Dimensions | 9.9 × 8.2 × 3 cm |
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Related products
Raspberry Pi 4 Model B 2GB
$125.00 AUD inc GST
Out of stock
- Raspberry Pi Model B
- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 2GB LPDDR4 SDRAM
- 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
- True Gigabit Ethernet
Out of stock
Notify when stock available
Description
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 2GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 2GB LPDDR4 SDRAM
- 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
- True Gigabit Ethernet
- 2x USB 3.0 ports, 2x USB 2.0 Ports
- Fully backwards compatible 40-pin GPIO header
- 2x Micro HDMI ports supporting up to 4K 60Hz video resolution
- 2-lane MIPI DSI/CSI ports for camera and display
- 4-pole stereo audio and composite video port
- MicroSD card slot for loading operating system and data storage
- Requires 5.1V, 3A power via USB-C or GPIO
- PoE (Power over Ethernet) enabled (requires PoE HAT)
Raspberry Pi 4 B Pinout Schematic
Additional information
| Weight | 0.065 kg |
|---|
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related products
Coming Soon
Coming Soon
Coming Soon
Coming Soon
Coming Soon
Coming Soon
Coming Soon
Coming Soon
ABS Panels: VORON 2.4 Custom Single Panel
$231.00 AUD inc GST
ABS Panels for Voron 2.4
- Laser cut for Voron 2.4
- Available: 250mm / 300mm / 350mm
View Other Variations
Description
- Laser cut for the Voron 2.4
- Black ABS (Haircell pattern)
- 3mm Thickness
- Available in: 250mm / 300mm / 350mm
Additional information
| Size | 250mm, 300mm, 350mm, Custom Single Panel |
|---|
1 review for ABS Panels: VORON 2.4 Custom Single Panel
-
These panels are fantastic. I have been using them for a month now and there is no sign of warping (unlike the poor quality items supplied in my Formbot Kit). They are thick and sturdy and the surface finish enhances the look of Voron in my opinion.
They are dimensionally accurate and required no adjustments to fit my Voron 2.5 350.
Only logged in customers who have purchased this product may leave a review.
Dan Burns (verified owner) –
Another really good kit to keep around for all those extra mods as it comes with more than the Voron BoM needs.
Has been really handy to have the dividers for when you purchase more nuts and bolts or washers for other mods or work on your printer.