Voron Tap Upgrade Kit

$49.50 AUD inc GST

Out of stock

The Voron Tap upgrade is the latest release from the Voron Design team featuring:

  • physical nozzle probing
  • drop in upgrade to existing Voron 2 and Trident 3D printers (mgn12 x-rail required)
  • significantly more accurate than previous spec inductive sensors

Please see below for further information.

Printed parts are not included.

Out of stock

Notify when stock available

SKU: voron-tap-upgrade-kitCategories: Tags: , , , ,

Description

WHAT IS Voron TAP?
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch.
Tap offers many advantages over other z-probes; Here are a few examples:

EXTREME PRECISION
A well constructed Tap, when in service on a well-constructed printer, will be able to measure your Z position reliably with a precision of 0.4 µm
(0.0004 mm). This precision will help you better use and maintain your printer.

ANY BUILD SURFACE, CHANGE AT WILL
Tap can measure any securely mounted build surface. Print on Glass, Garolite, Alumina, Moon dust…it no longer matters. Textured plates are ideal for
Tap, but adhesive PEI sheets may also be used. Tap is unaffected by beds with magnetic fluctuations (note: magnets may affect the build surface Tap
is sensing, such as pulling the plate tighter over the magnet). Once Tap is setup, you should not need to recalibrate after changing nozzles or build
plates.

VORON DURABILITY, HIGH TEMPERATURE OPERATIONS
Tap uses light to detect movement and will never wear out. The sensor in Tap is rated to operate at 70C to 100C and will not degrade over time the
way a contact switch or inductive probe can. Even if you brought your chamber temperature to 100C, it will accurately and reliably record your printer
melting (assuming you printed in ABS).We tested dozens of printers and thousands of print hours. Hundreds of PIF quality kits were printed using
Tap. Some test printers had over 1,000,000 probe cycles to test durability.

NO COMPLICATED MACROS
For consistent probing temperatures, Tap uses a single ‘activate_gcode’ macro in the [probe] config. Tap is always ready to probe and requires no
docking or undocking moves.

Z ENDSTOP ELIMINATION
There is no need for a separate Z endstop. Once the offset is configured, it will hold without appreciable drift. It is normal to need slightly different
offsets when switching between filament types.

Upgrade kit includes the following:

Qty: Description
1 50mm MGN9H Fermio Rail/Carriage
4 6mm x 3mm N52 magnet
11 Heatset Inserts
1 M3 Hex Nut
6 M3 washers
2 M3x20 SHCS
2 M3x16 SHCS
1 M3x12 SHCS
3 M3x8 SHCS
1 M3x6 SHCS
2 M3x6 FHCS
2 M3x10 BHCS
10 M3x6 BHCS
1 OptoTap v2 PCB (5v / 24v)
1 PCB Sensor – EE-SX398

All fasteners are CL12.9 high tensile alloy steel.

For further information and assembly instruction manual, please visit the official Voron Design github repository here:

https://github.com/VoronDesign/Voron-Tap

Additionally, please be sure to use optotap_eeSX398_solder_jig.stl for sensor alignment on the pcb.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.